PUSHNUTS® AUTO-FEED PN-TYPE

AUTO-FEED PUSH-ON SHAFT RETAINERS (EFC 02p1401)

Double click on above image to view full picture

More Views

PUSHNUTS® AUTO-FEED PN-TYPE

Product Description

Auto-Feed Push-On Shaft Retainers are available in 4 sizes to fit .125 - .250 inch stud or rod diameters.

Features and Benefits

Surface Hardness must not exceed Rockwell 30T 78Ends must be free of distortion or burrsChamfer 0.8 x 45 ° for easier assemblyRecommended Diameter Tolerance recommended is +.08 / -.05Nickel, Chromium or other hard finishes on steel are not recommendedNickel-Chromium plating on die-cast studs must not exceed .080 thickness

EFC 02p1401

EFC Part Number	Availability	Stud Diameter (in)	Stud Diameter (mm)	OD (IN)	OD (MM)	Tooth ID (in)	Tooth ID (mm)	DESIGN	MATERIAL THICKNESS (IN)	MATERIAL THICKNESS (MM)	Holding Strength Force (Lbs)	MATERIAL
70006752-XX	Call for Quote	-	4	-	11	-	3.61-3.76	1	-	.23-.28	-	Steel
70006753-XX	Call for Quote	-	5	-	11	-	4.62-4.78	1	-	.33-.38	-	Steel
70007129-XX	Call for Quote	-	6	-	11	-	5.59-5.74	1	-	.43-.49	-	Steel
02P800015-XX	Call for Quote	0.125	-	0.448	-	.112-.118	-	1	.009-.011	-	15-130	Steel
E02P14010008	Call for Quote	0.156	-	-	-	0.137	-	1	.009-.011	-	15-150	Steel
E02P14010009	Call for Quote	0.188	-	-	-	0.172	-	1	.009-.011	-	20-200	Steel
02P800006-XX	Call for Quote	0.25	-	0.448	-	.232-.240	-	1	.009-.011	-	28-350	Steel

800-888-3326

Site Navigation

EFC Clamp

Main Navigation

You're currently on:

More Views

PUSHNUTS® AUTO-FEED PN-TYPE

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC