STANDARD SLOTTED SPRING PINS

Double click on above image to view full picture

More Views

STANDARD SLOTTED SPRING PINS

Product Description

Choose ASME PINS for all your new applications as well as current applications in which you are experiencing insertion problems or performance failures. ASME 18.8.4M TYPE B (METRIC) SLOTTED SPRING PINS have thicker walls and a slot running the full length of the pin, allowing even compression during installation. This creates continuous pressure toward the walls of the mounting hole, providing radial tension to prevent loosening from shock or vibration.

Features and Benefits

• Lower Insertion Force - resulting from a smaller free diameter of the pin in relation to the nominal hole
• No Interlocking - the maximum gap in the free diameter is less than the wall thickness of the pin
• Higher Shear Strength - based on increased wall thickness, higher minimum hardness & narrower slots
• Straightness - ASME specifies straightness requirements unaddressed by ISO
• Substitute for ISO pins (3mm and larger) without review or change

MATERIALS & HARDNESS:
Carbon Steel - HV 420-520
Chrome Stainless Steel - HV 440-560
Nickel Stainless Steel - Work Hardened

FINISHES:
Plain
Passivated
Zinc

EFC 10S855

EFC Part Number	Availability	Nominal Pin Diameter	TEMP	LENGTH	Pin Diameter (D)*	Nominal Chamfer Length (C)	Nominal Wall Thickness (C)	Recommended Hole Size	Length Tolerance	STANDARD	Unit of Measure	MATERIAL	FINISH
E10S08550018	Call for Quote	1.5	1.5	12	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550021	Call for Quote	1.5	1.5	14	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550024	Call for Quote	1.5	1.5	16	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550027	Call for Quote	1.5	1.5	18	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550030	Call for Quote	1.5	1.5	20	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550033	Call for Quote	1.5	1.5	22	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550036	Call for Quote	1.5	1.5	24	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550039	Call for Quote	1.5	1.5	26	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550042	Call for Quote	1.5	1.5	28	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550003	Call for Quote	1.5	1.5	4	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550006	Call for Quote	1.5	1.5	5	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550009	Call for Quote	1.5	1.5	6	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550012	Call for Quote	1.5	1.5	8	1.70-1.80	0.25	0.30	1.50-2.00	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550584	Call for Quote	10	10	100	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550524	Call for Quote	10	10	20	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550527	Call for Quote	10	10	22	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550530	Call for Quote	10	10	24	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550533	Call for Quote	10	10	26	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550536	Call for Quote	10	10	28	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550539	Call for Quote	10	10	30	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550542	Call for Quote	10	10	32	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550545	Call for Quote	10	10	35	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550548	Call for Quote	10	10	40	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550551	Call for Quote	10	10	45	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550554	Call for Quote	10	10	50	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550557	Call for Quote	10	10	55	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550560	Call for Quote	10	10	60	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550563	Call for Quote	10	10	65	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550566	Call for Quote	10	10	70	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550569	Call for Quote	10	10	75	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550572	Call for Quote	10	10	80	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550575	Call for Quote	10	10	85	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550578	Call for Quote	10	10	90	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550581	Call for Quote	10	10	95	10.50-10.80	2.00	2.00	10.00-10.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550642	Call for Quote	12	12	100	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550588	Call for Quote	12	12	24	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550591	Call for Quote	12	12	26	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550594	Call for Quote	12	12	28	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550597	Call for Quote	12	12	30	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550600	Call for Quote	12	12	32	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550603	Call for Quote	12	12	35	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550606	Call for Quote	12	12	40	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550609	Call for Quote	12	12	45	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550612	Call for Quote	12	12	50	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550615	Call for Quote	12	12	55	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550618	Call for Quote	12	12	60	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550621	Call for Quote	12	12	65	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550624	Call for Quote	12	12	70	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550627	Call for Quote	12	12	75	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550630	Call for Quote	12	12	80	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550633	Call for Quote	12	12	85	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550636	Call for Quote	12	12	90	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550639	Call for Quote	12	12	95	12.50-12.80	2.00	2.50	12.00-12.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550687	Call for Quote	14**	14	100	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550645	Call for Quote	14**	14	30	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550648	Call for Quote	14**	14	35	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550651	Call for Quote	14**	14	40	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550654	Call for Quote	14**	14	45	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550657	Call for Quote	14**	14	50	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550660	Call for Quote	14**	14	55	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550663	Call for Quote	14**	14	60	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550666	Call for Quote	14**	14	65	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550669	Call for Quote	14**	14	70	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550672	Call for Quote	14**	14	75	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550675	Call for Quote	14**	14	80	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550678	Call for Quote	14**	14	85	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550681	Call for Quote	14**	14	90	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550684	Call for Quote	14**	14	95	14.50-14.80	2.00	3.00	14.00-14.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550729	Call for Quote	16**	16	100	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550690	Call for Quote	16**	16	35	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550693	Call for Quote	16**	16	40	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550696	Call for Quote	16**	16	45	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550699	Call for Quote	16**	16	50	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550702	Call for Quote	16**	16	55	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550705	Call for Quote	16**	16	60	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550708	Call for Quote	16**	16	65	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550711	Call for Quote	16**	16	70	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550714	Call for Quote	16**	16	75	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550717	Call for Quote	16**	16	80	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550720	Call for Quote	16**	16	85	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550723	Call for Quote	16**	16	90	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550726	Call for Quote	16**	16	95	16.50-16.80	2.00	3.00	16.00-16.18	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550057	Call for Quote	2	2	10	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550060	Call for Quote	2	2	12	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550063	Call for Quote	2	2	14	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550066	Call for Quote	2	2	16	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550069	Call for Quote	2	2	18	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550072	Call for Quote	2	2	20	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550075	Call for Quote	2	2	22	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550078	Call for Quote	2	2	24	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550081	Call for Quote	2	2	26	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550084	Call for Quote	2	2	28	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550087	Call for Quote	2	2	30	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550090	Call for Quote	2	2	32	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550093	Call for Quote	2	2	35	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550045	Call for Quote	2	2	4	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550096	Call for Quote	2	2	40	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550048	Call for Quote	2	2	5	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550051	Call for Quote	2	2	6	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550054	Call for Quote	2	2	8	2.30-2.40	0.35	0.40	2.00-2.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550109	Call for Quote	2.5	2.5	10	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550112	Call for Quote	2.5	2.5	12	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550115	Call for Quote	2.5	2.5	14	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550118	Call for Quote	2.5	2.5	16	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550121	Call for Quote	2.5	2.5	18	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550124	Call for Quote	2.5	2.5	20	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550127	Call for Quote	2.5	2.5	22	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550130	Call for Quote	2.5	2.5	24	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550133	Call for Quote	2.5	2.5	26	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550136	Call for Quote	2.5	2.5	28	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550139	Call for Quote	2.5	2.5	30	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550142	Call for Quote	2.5	2.5	32	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550145	Call for Quote	2.5	2.5	35	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550148	Call for Quote	2.5	2.5	40	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550150	Call for Quote	2.5	2.5	45	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550100	Call for Quote	2.5	2.5	5	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550103	Call for Quote	2.5	2.5	6	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550106	Call for Quote	2.5	2.5	8	2.80-2.90	0.40	0.50	2.50-2.60	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550807	Call for Quote	20	20	100	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550771	Call for Quote	20	20	40	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550774	Call for Quote	20	20	45	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550777	Call for Quote	20	20	50	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550780	Call for Quote	20	20	55	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550783	Call for Quote	20	20	60	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550786	Call for Quote	20	20	65	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550789	Call for Quote	20	20	70	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550792	Call for Quote	20	20	75	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550795	Call for Quote	20	20	80	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550798	Call for Quote	20	20	85	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550801	Call for Quote	20	20	90	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550804	Call for Quote	20	20	95	20.50-20.90	3.00	4.00	20.00-20.21	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550160	Call for Quote	3	3	10	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550163	Call for Quote	3	3	12	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550166	Call for Quote	3	3	14	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550169	Call for Quote	3	3	16	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550172	Call for Quote	3	3	18	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550175	Call for Quote	3	3	20	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550178	Call for Quote	3	3	22	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550181	Call for Quote	3	3	24	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550184	Call for Quote	3	3	26	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
10S00134-00	Call for Quote	3	3	28	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550190	Call for Quote	3	3	30	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550193	Call for Quote	3	3	32	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550196	Call for Quote	3	3	35	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550199	Call for Quote	3	3	40	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550202	Call for Quote	3	3	45	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550205	Call for Quote	3	3	50	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550154	Call for Quote	3	3	6	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550157	Call for Quote	3	3	8	3.30-3.50	0.50	0.60	3.00-3.10	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550210	Call for Quote	3.5	3.5	10	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550212	Call for Quote	3.5	3.5	12	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550214	Call for Quote	3.5	3.5	14	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550216	Call for Quote	3.5	3.5	16	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550218	Call for Quote	3.5	3.5	18	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550220	Call for Quote	3.5	3.5	20	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550222	Call for Quote	3.5	3.5	22	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550224	Call for Quote	3.5	3.5	24	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550226	Call for Quote	3.5	3.5	26	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550228	Call for Quote	3.5	3.5	28	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550230	Call for Quote	3.5	3.5	30	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550232	Call for Quote	3.5	3.5	32	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550234	Call for Quote	3.5	3.5	35	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550236	Call for Quote	3.5	3.5	40	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550238	Call for Quote	3.5	3.5	45	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550240	Call for Quote	3.5	3.5	50	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550208	Call for Quote	3.5	3.5	8	3.80-4.00	0.60	0.75	3.50-3.62	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550246	Call for Quote	4	4	10	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550249	Call for Quote	4	4	12	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550252	Call for Quote	4	4	14	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550255	Call for Quote	4	4	16	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550258	Call for Quote	4	4	18	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550261	Call for Quote	4	4	20	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550264	Call for Quote	4	4	22	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550267	Call for Quote	4	4	24	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550270	Call for Quote	4	4	26	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550273	Call for Quote	4	4	28	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550276	Call for Quote	4	4	30	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550279	Call for Quote	4	4	32	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550282	Call for Quote	4	4	35	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550285	Call for Quote	4	4	40	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550288	Call for Quote	4	4	45	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550291	Call for Quote	4	4	50	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550294	Call for Quote	4	4	55	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550297	Call for Quote	4	4	60	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550243	Call for Quote	4	4	8	4.40-4.60	0.65	0.80	4.00-4.12	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550300	Call for Quote	4.5	4.5	10	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550302	Call for Quote	4.5	4.5	12	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550304	Call for Quote	4.5	4.5	14	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550306	Call for Quote	4.5	4.5	16	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550308	Call for Quote	4.5	4.5	18	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550310	Call for Quote	4.5	4.5	20	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550312	Call for Quote	4.5	4.5	22	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550314	Call for Quote	4.5	4.5	24	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550316	Call for Quote	4.5	4.5	26	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550318	Call for Quote	4.5	4.5	28	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550320	Call for Quote	4.5	4.5	30	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550322	Call for Quote	4.5	4.5	32	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550324	Call for Quote	4.5	4.5	35	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550326	Call for Quote	4.5	4.5	40	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550328	Call for Quote	4.5	4.5	45	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550330	Call for Quote	4.5	4.5	50	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550332	Call for Quote	4.5	4.5	55	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550334	Call for Quote	4.5	4.5	60	4.90-5.10	0.80	1.00	4.50-4.62	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550337	Call for Quote	5	5	10	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.25	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550340	Call for Quote	5	5	12	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550343	Call for Quote	5	5	14	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550346	Call for Quote	5	5	16	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550349	Call for Quote	5	5	18	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550352	Call for Quote	5	5	20	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550355	Call for Quote	5	5	22	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550358	Call for Quote	5	5	24	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550361	Call for Quote	5	5	26	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550364	Call for Quote	5	5	28	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550367	Call for Quote	5	5	30	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550370	Call for Quote	5	5	32	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550373	Call for Quote	5	5	35	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550376	Call for Quote	5	5	40	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550379	Call for Quote	5	5	45	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550382	Call for Quote	5	5	50	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550385	Call for Quote	5	5	55	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550388	Call for Quote	5	5	60	5.40-5.60	0.90	1.00	5.00-5.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550392	Call for Quote	6	6	12	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550395	Call for Quote	6	6	14	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550398	Call for Quote	6	6	16	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550401	Call for Quote	6	6	18	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550404	Call for Quote	6	6	20	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550407	Call for Quote	6	6	22	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550410	Call for Quote	6	6	24	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550413	Call for Quote	6	6	26	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550416	Call for Quote	6	6	28	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550419	Call for Quote	6	6	30	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550422	Call for Quote	6	6	32	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550425	Call for Quote	6	6	35	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550428	Call for Quote	6	6	40	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550431	Call for Quote	6	6	45	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550434	Call for Quote	6	6	50	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550437	Call for Quote	6	6	55	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550440	Call for Quote	6	6	60	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550443	Call for Quote	6	6	65	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550446	Call for Quote	6	6	70	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550449	Call for Quote	6	6	75	6.40-6.70	1.20	1.20	6.00-6.12	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550520	Call for Quote	8	8	100	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550454	Call for Quote	8	8	16	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550457	Call for Quote	8	8	18	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550460	Call for Quote	8	8	20	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550463	Call for Quote	8	8	22	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550466	Call for Quote	8	8	24	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550469	Call for Quote	8	8	26	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550472	Call for Quote	8	8	28	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550475	Call for Quote	8	8	30	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550478	Call for Quote	8	8	32	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550481	Call for Quote	8	8	35	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550484	Call for Quote	8	8	40	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550487	Call for Quote	8	8	45	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550490	Call for Quote	8	8	50	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.50	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550493	Call for Quote	8	8	55	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550496	Call for Quote	8	8	60	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550499	Call for Quote	8	8	65	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550502	Call for Quote	8	8	70	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550505	Call for Quote	8	8	75	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550508	Call for Quote	8	8	80	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550511	Call for Quote	8	8	85	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550514	Call for Quote	8	8	90	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED
E10S08550517	Call for Quote	8	8	95	8.50-8.80	2.00	1.50	8.00-8.15	+/-0.75	ISO 8752 EN 28752	METRIC	STEEL	PLAIN/OILED

800-888-3326

Site Navigation

EFC Clamp

Main Navigation

You're currently on:

More Views

STANDARD SLOTTED SPRING PINS

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC