NUTS - SELF RETAINING BLIND PRESS - Pierce & Captive Retaining Nuts

BLIND PRESS NUTS (EFC 11CF688)

Double click on above image to view full picture

More Views

NUTS - SELF RETAINING BLIND PRESS

Product Description

Blind Press Nuts with sealed-thread are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirts, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.

Features and Benefits

Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part.

These fasteners are identical to industry standards in all respects. Identical dimensions and hole sizes permit them to be fed through automatic insertion equipment. Captive blind press nuts are available in sizes from 4-40 to 1/4-20 (M3 to M6) in both carbon and stainless steel.

Use In:

* CFB - Materials with HRB-80 or less

* Materials with HRB-70 or less

EFC 11CF688

EFC Part Number	Availability	THREAD SIZE	Barrel Diameter Maximum (D)	Panel Thickness Minimum	Shank Diameter Maximum (A)	Maximum (Y)	Maximum (B)	(C)	(Z)	Minimum Center Hole to Panel Edge	Depth Full Thread Minimum (X)	MATERIAL
E11CF6880001	Call for Quote	M3 X 0.5	3.8	1	4.22	8.5	0.097	6.35	9.6	4.8	5.3	Carbon Steel
E11CF6880002	Call for Quote	M3 X 0.5	3.8	1	4.22	8.5	0.097	6.35	9.6	4.8	5.3	Stainless Steel
E11CF6880003	Call for Quote	M3 X 0.5	3.8	1.4	4.22	8.5	1.37	6.35	9.6	4.8	5.3	Carbon Steel
E11CF6880004	Call for Quote	M3 X 0.5	3.8	1.4	4.22	8.5	1.37	6.35	9.6	4.8	5.3	Stainless Steel
E11CF6880005	Call for Quote	M4 x 0.7	5.2	1	5.38	9.8	0.097	7.95	11.2	6.9	7.1	Carbon Steel
E11CF6880006	Call for Quote	M4 x 0.7	5.2	1	5.38	9.8	0.097	7.95	11.2	6.9	7.1	Stainless Steel
E11CF6880007	Call for Quote	M4 x 0.7	5.2	1.4	5.38	9.8	1.37	7.95	11.2	6.9	7.1	Carbon Steel
E11CF6880008	Call for Quote	M4 x 0.7	5.2	1.4	5.38	9.8	1.37	7.95	11.2	6.9	7.1	Stainless Steel
E11CF6880009	Call for Quote	M5 X 0.8	6	1	6.38	9.8	0.097	8.75	11.2	7.1	7.1	Carbon Steel
E11CF6880010	Call for Quote	M5 X 0.8	6	1	6.38	9.8	0.097	8.75	11.2	7.1	7.1	Stainless Steel
E11CF6880011	Call for Quote	M5 X 0.8	6	1.4	6.38	9.8	1.37	8.75	11.2	7.1	7.1	Carbon Steel
E11CF6880012	Call for Quote	M5 X 0.8	6	1.4	6.38	9.8	1.37	8.75	11.2	7.1	7.1	Stainless Steel
E11CF6880013	Call for Quote	M6 X 1.0	7.8	1.4	8.72	12.7	1.37	11.1	14.3	8.6	7.8	Carbon Steel
E11CF6880014	Call for Quote	M6 X 1.0	7.8	1.4	8.72	12.7	1.37	11.1	14.3	8.6	7.8	Stainless Steel
E11CF6880015	Call for Quote	M6 X 1.0	7.8	2.3	8.72	12.7	2.21	11.1	14.3	8.6	7.8	Carbon Steel
E11CF6880016	Call for Quote	M6 X 1.0	7.8	2.3	8.72	12.7	2.21	11.1	14.3	8.6	7.8	Stainless Steel
E11CF6880017	Call for Quote	#4-40	0.149	0.04	0.165	0.335	0.038	0.25	0.38	0.19	0.21	Carbon Steel
E11CF6880018	Call for Quote	#4-40	0.149	0.04	0.165	0.335	0.038	0.25	0.38	0.19	0.21	Stainless Steel
E11CF6880019	Call for Quote	#4-40	0.149	0.056	0.165	0.335	0.054	0.25	0.38	0.19	0.21	Carbon Steel
E11CF6880020	Call for Quote	#4-40	0.149	0.056	0.165	0.335	0.054	0.25	0.38	0.19	0.21	Stainless Steel
E11CF6880021	Call for Quote	#6-32	0.169	0.04	0.186	0.335	0.038	0.28	0.38	0.22	0.23	Carbon Steel
E11CF6880022	Call for Quote	#6-32	0.169	0.04	0.186	0.335	0.038	0.28	0.38	0.22	0.23	Stainless Steel
E11CF6880023	Call for Quote	#6-32	0.169	0.056	0.186	0.335	0.054	0.28	0.38	0.22	0.23	Carbon Steel
E11CF6880024	Call for Quote	#6-32	0.169	0.056	0.186	0.335	0.054	0.28	0.38	0.22	0.23	Stainless Steel
E11CF6880025	Call for Quote	1/4/2020	0.305	0.09	0.343	0.5	0.087	0.43	0.56	0.34	0.31	Carbon Steel
E11CF6880026	Call for Quote	1/4/2020	0.305	0.09	0.343	0.5	0.087	0.43	0.56	0.34	0.31	Stainless Steel
E11CF6880027	Call for Quote	#8-32	0.204	0.04	0.212	0.385	0.038	0.31	0.44	0.27	0.28	Carbon Steel
E11CF6880028	Call for Quote	#8-32	0.204	0.04	0.212	0.385	0.038	0.31	0.44	0.27	0.28	Stainless Steel
E11CF6880029	Call for Quote	#8-32	0.204	0.056	0.212	0.385	0.054	0.31	0.44	0.27	0.28	Carbon Steel
E11CF6880030	Call for Quote	#8-32	0.204	0.056	0.212	0.385	0.054	0.31	0.44	0.27	0.28	Stainless Steel
E11CF6880031	Call for Quote	#10-32	0.235	0.04	0.249	0.385	0.038	0.34	0.44	0.28	0.28	Carbon Steel
E11CF6880032	Call for Quote	#10-32	0.235	0.04	0.249	0.385	0.038	0.34	0.44	0.28	0.28	Stainless Steel
E11CF6880033	Call for Quote	#10-32	0.235	0.056	0.249	0.385	0.054	0.34	0.44	0.28	0.28	Carbon Steel
E11CF6880034	Call for Quote	#10-32	0.235	0.056	0.249	0.385	0.054	0.34	0.44	0.28	0.28	Stainless Steel
E11CF6880035	Call for Quote	1/4/2020	0.305	0.056	0.343	0.5	0.054	0.43	0.56	0.34	0.31	Carbon Steel
E11CF6880036	Call for Quote	1/4/2020	0.305	0.056	0.343	0.5	0.054	0.43	0.56	0.34	0.31	Stainless Steel

800-888-3326

Site Navigation

EFC Clamp

Main Navigation

You're currently on:

More Views

NUTS - SELF RETAINING BLIND PRESS

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC