800-888-3326
Call us on Skype for FREE!
ISO 9001:2000 Certified News | Contact | Search
ISO 9001:2000 Certified News | Contact | Search
• Eases assembly
• Superior resistance to vibration loosening
• Increases drive-to-strip ratio and prevailing torque
• Lowers required drive torque and end load requirements
POINT STYLES:
Standard: features a long lead (3-5 threads) for low thread-forming torque. Larger sizes (M6 and over) have stabilizing threads to aid alignment and ease starting.
Gimlet: for use where clearance holes and pilot holes do not align.
Short: for use in blind holes, particularly non-ferrous materials like aluminum.
MATERIALS: Steel nut members, Aluminum nut members, Zinc alloy nut members
EFC 501059
| EFC Part Number | Availability | APPLICATION COMPARISON: | TAPTITE II� | Duo-Taptite® ½ | TAPTITE 2000� |
|---|---|---|---|---|---|
| E50010590001 | Call for Quote | Lowest Thread-Forming Torque | YES | ||
| E50010590003 | Call for Quote | Positioning Applications | YES | YES | |
| E50010590004 | Call for Quote | Structural Applications | YES | YES | |
| E50010590005 | Call for Quote | High Torque-Tension Applications | YES | YES | |
| E50010590006 | Call for Quote | High Strip-Out Requirement | YES | YES | |
| E50010590007 | Call for Quote | Automation Capability | YES | YES | YES |
| E50010590008 | Call for Quote | Nut Member greater than 1.5 x Screw Diameter | YES | YES | |
| E50010590009 | Call for Quote | Nut Member less than 0.3 x Screw Diameter | YES | YES | |
| E50010590010 | Call for Quote | Adaptability to Different Point Styles | YES | YES | |
| E50010590011 | Call for Quote | High Axial Alignment Required | YES | YES |