EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
The 2-Ear Clamp provides increased clamping range over the 1-Ear Clamp. The closed "ear" geometry provides an inherent retained load and a spring action in the clamp, permitting expansion and contraction during thermo-cycling or vibrating conditions. This is a robust, durable one-piece design that offers a positive, tamper resistant seal. Smooth edges prevent damage to hoses and the one-piece design offers quick and easy installation. Parts listed on this page are Electro-Zinc plated Carbon Steel only.
Unit of Measure

Specifications

Band Width (Decimal)

 N/A 0.118 in3.00 mm

Finish

 N/A Electro-Zinc Plated

Maximum Clamp Size

 N/A 4.382 in111.30 mm

Reference Size

 N/A 4.382 in111.30 mm

Material

 N/A Carbon Steel

Material

Note for Material

 N/A SAE 1008/1010 or DIN 1.0338

Features and Benefits

Features and Benefits

 N/A This is a medium pressure clamp that is widely used for maintenance and OEM applications. Rubber hose, plastic tubing, coaxial and electrical cable, rope, etc. are all easily clamped. These clamps are installed on air, fluid, gas and steam lines.

Note

Note

 N/A
  • When ordering your 2-ear clamps, select nominal clamp size nearest to, but always larger than, O.D. of material to be clamped after insert has been fitted.
  • For proper installation both "ears" must be crimped closed.
  • Special Installation tools are available. Please contact EFC International directly.