Type |
N/A Expansion |
Head Type |
N/A Flat Bottom |
Thickness (Decimal) |
N/A 0.032 in |
Height |
N/A 0.250 in |
Maximum Closed End |
N/A 0.502 in |
Minimum Closed End |
N/A 0.500 in |
Height Tolerance (±) |
N/A 0.020 in |
Inside Radius |
N/A 0.031 in |
Maximum Open End |
N/A 0.511 in |
Minimum Open End |
N/A 0.508 in |
Nominal Diameter (Decimal) |
N/A 0.5 in |
Material |
N/A Heavy Duty Galvanized Steel |
Finish |
N/A G90 Galvanized |
Features and Benefits |
N/A For insertion, they should be driven from the RIM and not on the bottom. The driving arbor should be 0.015/0.025" smaller than the ID of the plug, with a contact radius of 0.062" and should not touch the bottom of the plug. Plugs Taper Down 0.002" / 0.005" From Open End |