Material |
N/A Steel 1010/1008 |
Thread Size |
N/A 1/2-13 |
Head Height |
N/A 0.047 in |
Mounting Hole Diameter |
N/A 0.687 in |
Finish |
N/A Yellow Zinc Dichromate |
Head Outside Diameter |
N/A 0.865 in |
Maximum Dimension D |
N/A 0.685 in |
Grip Call Out |
N/A 500 |
Thread Call Out |
N/A 813 |
Maximum Dimension Il |
N/A 0.860 in |
Length |
N/A 1.450 in |
Restriction of Hazardous Substances Directive Standard |
N/A No |
Maximum Grip Size |
N/A 0.4 in |
End Features |
N/A Open |
Minimum Grip Size |
N/A 0.28 in |
Pressure |
N/A 50 psi3.4 bar |
Industry Standards/Certifications |
N/A Unified National Coarse (UNC) |
Features and Benefits |
N/A
|
Note |
N/A These inserts are to be used with Grade 5 or Metric Class 8.8/9.8 mating screws. The PVC Foam Seal is not recommended for use with petroleum based liquids. All sizes available are listed on this page, in a representative sampling of materials, finishes and end options (Open for most versatility, and Closed to eliminate leakage past threads). Contact EFC International directly for any sizes not shown in the specific material, finish or design your application requires. |