Print Back
The Slotted Body Insert has been designed for use in plastics and thin gauge sheet metal applications where increased pull-out resistance is required. The round body has four slotted segments that fold outward from the hole center as the insert is installed, to grip the host material from the backside. They can be used in single, variable or multiple thicknesses of materials with no adjustments, when installed with proper hand or pneumatic torque tools. These inserts are standard with a round head, or order a square head to be used in embossed or molded square-shaped recesses for maximum spin out resistance.
Unit of Measure

Specifications

Thread Size

N/A 1/4-20

Finish

N/A Tin-zinc with yellow Chromate (400 red Rust)

Grip Call Out

N/A 0.280

Industry Standards/Certifications

N/A Unified National Coarse (UNC)

Thread Call Out

N/A 420

Maximum Dimension Il

N/A 0.520 in

End Features

N/A Open

Minimum Dimension D

N/A 0.368 in

Maximum Dimension D

N/A 0.382 in

Grip Identification Mark

N/A Blank

Minimum Grip Size

N/A 0.020 in

Maximum Grip Size

N/A 0.280 in

Minimum Head Height

N/A 0.053 in

Maximum Head Height

N/A 0.063 in

Minimum Head Outside Diameter

N/A 0.610 in

Maximum Head Outside Diameter

N/A 0.645 in

Minimum Hole Diameter

N/A 0.390 in

Maximum Hole Diameter

N/A 0.396 in

Minimum Length

N/A 0.985 in

Maximum Length

N/A 1.015 in

Features and Benefits

Features and Benefits

N/A
  • Plastics and Thin Gauge Sheet Metals - Steel 1010/1008
  • Varying Thickness Materials without adjustment, using torque stall type tools available through EFC International
  • Exceptional Pull Out Resistance even in hand-drilled or over-sized holes
  • Superior Corrosion Resistance since all surfaces of the body are plated
  • Superior Thread Strength due to internal roll threading process
  • Quality Installation locate special installation tools anywhere in assembly, even in variable thickness materials, before or after finish.

Note

Note

N/A Special Installation tools are available through EFC International. Optional features, materials and finishes, including a square-headed design, are also available. Please contact EFC International for more details.