Print Back
CPV Solar Connectors mate with bulkhead connectors to create a liquid-tight seal for photovoltaic wire interconnections. CPV Solar Connectors offer a large cable diameter range that covers an expansive selection of both USE-2 and 1000V PV cables. The connectors are pre-cut and terminated CPV assemblies constructed from UV resistant 10AWG UL/TUV approved solar cable. Suitable for both UL and IEC solar installations, they have a maximum cable assembly current rating of 30 amps.
Unit of Measure

Specifications

Maximum Overall Length

N/A 2.80 in

Maximum Cable Diameter

N/A 0.315 in

Minimum Cable Diameter

N/A 0.26 in

Body Length

N/A 2.17 in

Wrench Flats

N/A 0.940 in23.88 mm

Material

N/A Polycarbonate

Color

N/A Black

Connector Type

N/A Solar

Temperature

N/A -40 to 185 ºF-40 to 105 ºC

Maximum Temperature Rating

N/A 105 ºC221 ºF

Ingress Protection (IP) Rating

N/A Ingress Protection (IP) 65 Ingress Protection (IP) 67

Flammability Rating

N/A V0

Industry Standards/Certifications

N/A Recognized under the Component Program of Underwriters™ Laboratories File E344722. TUV Certification Number R60033714

Features and Benefits

Features and Benefits

N/A
  • Acme threads on cap to prevent skipping and speed install.
  • Connectors meet all UL cold impact requirements of -35ºC test.
  • Meets all NEC requirements for solar installations.
  • Polycarbonate construction for good chemical and impact resistance.
  • Rated Current 22 A (2.5 mm²), 30A (4 mm² - 6 mm²).
  • Rated Voltage, 1kV DC.
  • Overvoltage category III
  • Pollution degree, 3.
  • Crimped terminal connections.
  • Not rewirable conductor connections.
  • RoHS and REACH compliant.