Print Back
Straight Nylon Liquid Tight Fittings with Domed Sealing Nuts are available in 7 NPT sizes for use with our 3/8" thru 2" Flexible Nonmetallic Liquid Tight Conduit and Tubing, plus 1 additional PG size for our 1/4" Flexible PVC Tubing. They are all Nylon construction, and sizes over 1" are PVC. These fittings are a reusable complete conduit/connector system which requires no disassembly or threading of the conduit/tubing to install. They are suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
Unit of Measure

Specifications

Material

N/A Nylon 6/6

Color

N/A Black

Overall Length

N/A 2.250 in57.2 mm

Thread Size

N/A 1 in

Thread Type

N/A National Pipe Thread (NPT)

Mounting Hole Diameter

N/A 1.375 in34.9 mm

Thread Length

N/A 0.780 in19.8 mm

Nut Thickness

N/A 0.250 in6.3 mm

Conduit Size

N/A 1 in

Locknut Material

N/A Nylon (Packed Separately)

Use Sealing

N/A 20707004-A030I

Wrench Flats

N/A 1.812 in46.00 mm

Weight

N/A 10.23 lb

Features and Benefits

Features and Benefits

N/A
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Use of a Sealing Washer may be required for wet locations.
  • Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.

Note

Note

N/A Nylon Locknuts ARE included with the Black Connectors shown on this page, and assembled O-Ring and metal locknuts ARE included with the Gray Connectors.