NUTS - SELF RETAINING BLIND PRESS

BLIND PRESS NUTS (EFC 11CF688)

Double click on above image to view full picture

More Views

NUTS - SELF RETAINING BLIND PRESS

Product Description

Blind Press Nuts with sealed-thread are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirts, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.

Features and Benefits

Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part.

These fasteners are identical to industry standards in all respects. Identical dimensions and hole sizes permit them to be fed through automatic insertion equipment. Captive blind press nuts are available in sizes from 4-40 to 1/4-20 (M3 to M6) in both carbon and stainless steel.

Use In:

* CFB - Materials with HRB-80 or less

* Materials with HRB-70 or less

EFC 11CF688

Volume discounts may apply.

Can't find what you're looking for? Click here.

EFC Part Number	THREAD SIZE	Barrel Diameter Maximum (D)	Panel Thickness Minimum	Shank Diameter Maximum (A)	Maximum (Y)	Maximum (B)	(C)	(Z)	Minimum Center Hole to Panel Edge	Depth Full Thread Minimum (X)	MATERIAL	Unit

800-888-3326

Site Navigation

Main Navigation

You're currently on:

More Views

NUTS - SELF RETAINING BLIND PRESS

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC