NUTS - SELF RETAINING BROACHING TYPE

BROACHING TYPE FASTENERS (EFC 11CF682)

Double click on above image to view full picture

More Views

NUTS - SELF RETAINING BROACHING TYPE

Product Description

Broaching-Type Fasteners are designed for use on printed circuit boards and on most brittle and hard materials: glass laminates, epoxy or resin with paper, nylon, or canvas bases. They are also used on materials too thin or unsuitable for threading, such as acrylic and polycarbonate panels.

Features and Benefits

Since the aforementioned materials do not flow under pressure, these fasteners are designed with a knurled shank that can be pressed into a drilled hole. The shank grips the board with an interference fit by broaching its way into the panel as it is squeezed into the holes.

All fasteners from EFC-INTL are identical to industry standards so that they can be fed through standard automatic insertion equipment.

*Spec. ASTM B633-85

Thread: Class 2B, MIL - S - 7742; (6H ISO Metric)

Use In: Materials with Rockwell Hardness of B-60 or less

EFC 11CF682

Volume discounts may apply.

Can't find what you're looking for? Click here.

EFC Part Number	THREAD SIZE	A	B	(C)	Hole Inside Diameter	Minimum Center of Hole to Edge of Panel	Panel Thickness Minimum	MATERIAL	Unit of Measure	Unit

800-888-3326

Site Navigation

Main Navigation

You're currently on:

More Views

NUTS - SELF RETAINING BROACHING TYPE

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC