FITTINGS - LIQUID TIGHT - SWEEP - 90° - SNAP-IN - ECONOMY -NYLON - Electrical Connectors for Marine

SNAP-IN 90

Double click on above image to view full picture

More Views

FITTINGS - LIQUID TIGHT - SWEEP - 90° - SNAP-IN - ECONOMY -NYLON

Product Description

These 90° Sweep Snap-In Nylon Liquid Tight Fittings are cost-saving and UL approved for use with Flexible PVC Liquid Tight Tubing found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all- Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing)

Optional Collars (Black and Gray ) are also available, to neaten rough cut tubing ends, and are listed below. Locknuts are listed in the "Liquid Tight Locknuts" section of our Electrical catalog.

Features and Benefits

• Easy, permanent assembly - twist the Tubing over the connector ferrule until the Tubing "clicks" into place.
• No tools needed for installation.
• Unique locking fingers accommodate various chassis thicknesses.
• Suitable for a wide array of electrical applications:
-Commercial and Industrial HVAC Systems
-Motorized Equipment
-Enclosed Power Sources
-Garage Door Openers
-Major Appliances

MATERIALS: Nylon 6/6
COLORS: Black and Gray are standard
CERTIFICATIONS: Recognized under the Component Program of Underwriters' Laboratories File #E121095
FLAMMABILITY RATING: 94V-2
MATERIAL TEMPERATURE INDEX: 125°C. Maximum temperature on the part shall not exceed 105°C

EFC 20878

Volume discounts may apply.

Can't find what you're looking for? Click here.

EFC Part Number	MATERIAL	UL DESCRIPTION	MTG HOLE (IN)	FITS CONDUIT SIZE	OAL MAX (IN)	OA HEIGHT MAX (IN)	BODY LENGTH (IN)	FLANGE OD (IN)	MTG HOLE (MM)	OAL MAX (MM)	OA HEIGHT MAX (MM)	BODY LENGTH (MM)	FLANGE OD (MM)	COLOR	Unit
20300267-A030	NYLON 6/6	HFC 3/8-S-90-TWISTBLK	.875	3/8	2.749	1.754	.390	1.230	22.20	69.80	44.60	9.90	31.20	BLACK	PKG of 500
20300267-A070	NYLON 6/6	HFC 3/8-S-90-TWISTGRY	.875	3/8	2.749	1.754	.390	1.230	22.20	69.80	44.60	9.90	31.20	GRAY	PKG of 500
20300268-A030	NYLON 6/6	HFC 1/2-S-90-TWISTBLK	.875	1/2	2.749	1.754	.390	1.230	22.20	69.80	44.60	9.90	31.20	BLACK	PKG of 50
20300268-A070	NYLON 6/6	HFC 1/2-S-90-TWISTGRY	.875	1/2	2.749	1.754	.390	1.230	22.20	69.80	44.60	9.90	31.20	GRAY	PKG of 1000
20300269-A030	NYLON 6/6	HFC 3/4-S-90-TWISTBLK	1.093	3/4	3.081	1.965	.390	1.500	27.80	78.30	50.00	9.90	38.10	BLACK	PKG of 250
20300269-A070	NYLON 6/6	HFC 3/4-S-90-TWISTGRY	1.093	3/4	3.081	1.965	.390	1.500	27.80	78.30	50.00	9.90	38.10	GRAY	PKG of 250

800-888-3326

Site Navigation

Main Navigation

You're currently on:

More Views

FITTINGS - LIQUID TIGHT - SWEEP - 90° - SNAP-IN - ECONOMY -NYLON

Product Description

Features and Benefits

EFC International

The Encyclopedia

MyEFC