STANDARD SLOTTED SPRING PINS

Double click on above image to view full picture

More Views

Product Description

Choose ASME PINS for all your new applications as well as current applications in which you are experiencing insertion problems or performance failures. ASME 18.8.4M TYPE B (METRIC) SLOTTED SPRING PINS have thicker walls and a slot running the full length of the pin, allowing even compression during installation. This creates continuous pressure toward the walls of the mounting hole, providing radial tension to prevent loosening from shock or vibration.

Features and Benefits

• Lower Insertion Force - resulting from a smaller free diameter of the pin in relation to the nominal hole
• No Interlocking - the maximum gap in the free diameter is less than the wall thickness of the pin
• Higher Shear Strength - based on increased wall thickness, higher minimum hardness & narrower slots
• Straightness - ASME specifies straightness requirements unaddressed by ISO
• Substitute for ISO pins (3mm and larger) without review or change

MATERIALS & HARDNESS:
Carbon Steel - HV 420-520
Chrome Stainless Steel - HV 440-560
Nickel Stainless Steel - Work Hardened

FINISHES:
Plain
Passivated
Zinc

EFC 10S855

Volume discounts may apply.

Can't find what you're looking for? Click here.

EFC Part Number	Nominal Pin Diameter	TEMP	LENGTH	Pin Diameter (D)*	Nominal Chamfer Length (C)	Nominal Wall Thickness (C)	Recommended Hole Size	Length Tolerance	STANDARD	Unit of Measure	MATERIAL	FINISH	Unit

800-888-3326

Site Navigation

Main Navigation

You're currently on:

More Views