EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Quick Release, Push-Turn Fasteners from Camloc® provide a vibration resistant joining solution for quick and repetitive attachment and removal of panels with minimum effort owing to their quick release push-turn fastening mechanisms. The CAM-PT10 Series of Push-Turn Fasteners lends itself to applications where easy access is required through removal and re-attachment of panels, covers or other components.
Camloc® PT10 Series Push-Turn Fasteners
Camloc® PT10 Series Push-Turn Fasteners - 2
Unit of Measure
Items Camloc® PT10 Series Push-Turn Fasteners
37720S01XB
Camloc® PT10 Series Stainless Steel Slot-Cross Recess Head Push-Turn Fastener with PA6 Washer 		Camloc® PT10 Series Push-Turn Fasteners
37720S02XB
Camloc® PT10 Series Stainless Steel Wing Head Push-Turn Fastener with PA6 Knob and Washer 		Camloc® PT10 Series Push-Turn Fasteners
37720W012K
Camloc® PT10 Series Push-Turn Fastener with Compensating Washer - Yellow Elastomer 		Camloc® PT10 Series Push-Turn Fasteners
3750E151K
Camloc® PT10 Series Push-Turn Fastener with Retaining Washer - Natural Polyamid
Description N/A Quick Release, Push-Turn Fasteners from Camloc® provide a vibration resistant joining solution for quick and repetitive attachment and removal of panels with minimum effort owing to their quick release push-turn fastening mechanisms. The CAM-PT10 Series of Push-Turn Fasteners lends itself to applications where easy access is required through removal and re-attachment of panels, covers or other components.
Temperature N/A -20 to +70 ºC
Maximum Tensile Strength N/A 1.200 N
Working Load N/A 800 N
Features and Benefits N/A
  • Grip range up to 7.5 times wider than similar products
    • Accommodates a wide variation of joint thicknesses
    • Compensates for material/plating tolerance variation
  • Fasteners can be locked and unlocked in a matter of seconds - saving time and reducing costs.
  • Requires 1/4 turn to open and closes by a push of the finger.
  • Wing head and combi-slot heads enable use by hand or tool.
  • All components are easy to install with no tooling required.
To select your 717F Series Push-Turn Fastener:
  1. Choose stud assembly according to Panel Thickness P and spring clip according to Frame Thickness F
  2. Select compensating and retaining washers
  3. Using the formula from the images labeled Determining the Stud Length Number, Stud Length Table and How to Determine the Part Number, select the stud length number from Panel Thickness P.
Additional Information N/A The CAM-PT10 Series features:
  • Wide grip range
  • 1/4 turn to open closes by a push of the finger
  • Fast installation of snap-in spring receptacle. No tools needed to install.
  • Tool or hand operated.
  • Tool operated stud has combination recess.
The Push-Turn CAM-PT10 Series offers a wide range of sizes to fit your applications. Receptacles for this series are the same as those shown with the 716F Series. For additional information, contact an EFC Representative.