EFC International - RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tools

Unit of Measure

Items	06ARIV998VUN Unified Thread Type RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool	06ARIV998VMT Metric Thread Type RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool	06A3767500 RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool
Description	N/A The RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool easily installs SpinTite® and MaxTite® fasteners.
Thread Type	N/A Unified	N/A Metric	N/A Tool Only
Air Pressure	N/A 90 psi	N/A 6 bar	N/A
Air Use Volume	N/A 457.5 in³	N/A 7.5 L	N/A
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure	N/A 4271 lb	N/A	N/A
Maximum Axial Pulling Load at 6 bar Pressure	N/A	N/A 19 kN	N/A
Maximum Stroke	N/A 0.256 in	N/A 6.5 mm	N/A
Minimum Hose Inside Diameter	N/A 0.375 in	N/A 9.5 mm	N/A
Weight	N/A 5.3 lb	N/A 2.4 kg	N/A
For Use With	N/A 4 to 3/8 in Female Threaded Inserts	N/A M3 to M12 Female Threaded Inserts	N/A
Features and Benefits	N/A The RIV998V tool has a hydro pneumatic system and the mechanical components of this tool are much more reliable so the tool works better and lasts longer than most other tools. The mandrel, a hardened socket head cap screw, easy to replace. Notes for below chart: (1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Note	N/A	N/A	N/A Nose Pieces Sold Separately