| Items |
06A2986300 0.236 Inch (in) Maximum Stroke RIV990 Hexcutter Tool |
 06A4630400 0.472 Inch (in) Maximum Stroke RIV991 Hexcutter Tool |
||
| Description | RIV990 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts. | RIV991 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts. | ||
| Air Pressure | 90 psi6 bar | |||
| Air Use Volume | 152.6 in³2.5 L | |||
| Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure | 4271 lb | |||
| Maximum Axial Pulling Load at 6 bar Pressure | 19 kN | 21 kN | ||
| Maximum Stroke | 0.236 in6 mm | 0.472 in12 mm | ||
| Minimum Hose Size | 3/8 in9.5 mm | |||
| Tool Weight | 5.07 lb2.3 kg | 5.29 lb2.4 kg | ||
| Features and Benefits | The RIV990 cuts hex hole sizes for #8-32 to 5/16 inches and M4 to M8. | RIV991 cuts #10-32 to 1/2 inches and M5 to M12 hex hole sizes. | ||
| Note |
Nose pieces for each tool are sold separately. Notes for below chart: (1) Tool Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. (3) Tool Weight shown without nose piece. |
Nose pieces for each tool are sold separately. Notes for below chart: (1) Tool Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of pressure regulator is recommended. (3) Tool Weight shown without nose piece. |
||
|
|
||||
