EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven.
Single Thread U-Nuts for Size 10-32 Machine Screws
Unit of Measure
Items Single Thread U-Nuts for Size 10-32 Machine Screws
01012048-
0.020 to 0.051 Inch (in) Panel Size Single Thread U-Nut 		Single Thread U-Nuts for Size 10-32 Machine Screws
01028003-
0.025 to 0.062 Inch (in) Panel Size Single Thread U-Nut 		Single Thread U-Nuts for Size 10-32 Machine Screws
01031034-
0.025 to 0.064 Inch (in) Panel Size Single Thread U-Nut 		Single Thread U-Nuts for Size 10-32 Machine Screws
70009368
0.025 to 0.064 Inch (in) Panel Size Single Thread U-Nut 		Single Thread U-Nuts for Size 10-32 Machine Screws
01145014-
0.045 to 0.062 Inch (in) Panel Size Single Thread U-Nut
Description N/A Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven.
Overall Length N/A 0.7 in N/A 0.66 in N/A 0.840 in N/A 0.840 in N/A 0.57 in
Screw Size N/A 10-32
Panel Size N/A 0.020 to 0.051 in N/A 0.025 to 0.062 in N/A 0.025 to 0.064 in N/A 0.025 to 0.064 in N/A 0.045 to 0.062 in
Material Thickness (Decimal) N/A 0.031 in N/A 0.017 in N/A 0.017 in N/A 0.017 in N/A 0.017 in
Design Variation N/A DF N/A DH N/A C N/A CD N/A DF
Impression Center to End N/A 0.23 in N/A 0.32 in N/A 0.32 in N/A 0.32 in N/A 0.26 in
Maximum Hole Center to Edge N/A 0.453 in N/A 0.312 in N/A 0.5 in N/A 0.5 in N/A 0.25 in
Overall Width N/A 0.63 in N/A 0.44 in N/A 0.44 in N/A 0.44 in N/A 0.63 in
Panel Hole Diameter N/A 0.281 in N/A 0.312 in N/A 0.218 in N/A 0.218 in N/A 0.25 in
Applications N/A U-Nuts can be designed into an automatic clothes washer to secure a solenoid and mounting bracket.
Additional Information N/A Corrosion presents no problem, as these U-Nuts will not freeze on screw threads. In fact, the U-Nut's impression actually cleans out rust, dirt or paint clots from the screw threads as they are removed. If the part you are looking for is not in the standard matrix below, please contact an EFC International Representative. If your part is not manufactured, EFC engineers can design exactly what you need to satisfy your unique applications.
Features and Benefits N/A
  • Lower Production Costs - faster assembly
  • Reduce Service Costs - lower maintenance
  • Anti-Vibration - prevents loosening
  • Replace Clinch-Type Fasteners - reduce material and handling costs.
Note N/A Please contact EFC International for information.