Print Back
Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven.
Single Thread U-Nuts for Size 10 Sheet Metal Screws
Unit of Measure
Items Single Thread U-Nuts for Size 10 Sheet Metal Screws
01113044-01Q
0.023 to 0.050 Inch (in) Panel Size Single Thread U-Nut
Single Thread U-Nuts for Size 10 Sheet Metal Screws
01073014-00Q
0.025 to 0.040 Inch (in) Panel Size Single Thread U-Nut
Single Thread U-Nuts for Size 10 Sheet Metal Screws
11025027-00
0.025 to 0.064 Inch (in) Panel Size Single Thread U-Nut
Single Thread U-Nuts for Size 10 Sheet Metal Screws
01166002-06Q
0.025 to 0.064 Inch (in) Panel Size Single Thread U-Nut
Single Thread U-Nuts for Size 10 Sheet Metal Screws
01034005-99Q
0.025 to 0.064 Inch (in) Panel Size Single Thread U-Nut
Description N/A Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven.
Overall Length N/A 0.47 in N/A 1.000 in N/A 0.73 in N/A 0.840 in N/A 0.840 in
Screw Size N/A 10A
Panel Size N/A 0.023 to 0.050 in N/A 0.025 to 0.040 in N/A 0.025 to 0.064 in N/A 0.025 to 0.064 in N/A 0.025 to 0.064 in
Material Thickness (Decimal) N/A 0.031 in
Design Variation N/A DF N/A Standard N/A CD N/A DK N/A D
Impression Center to End N/A 0.22 in N/A 0.36 in N/A 0.36 in N/A 0.32 in N/A 0.32 in
Maximum Hole Center to Edge N/A 0.25 in N/A 0.593 in N/A 0.343 in N/A 0.5 in N/A 0.5 in
Overall Width N/A 0.5 in N/A 0.44 in N/A 0.5 in N/A 0.44 in N/A 0.44 in
Panel Hole Diameter N/A 0.281 in N/A 0.281 in N/A 0.218 in N/A 0.281 in N/A 0.281 in
Weight N/A
Applications N/A U-Nuts can be designed into an automatic clothes washer to secure a solenoid and mounting bracket.
Additional Information N/A Corrosion presents no problem, as these U-Nuts will not freeze on screw threads. In fact, the U-Nut's impression actually cleans out rust, dirt or paint clots from the screw threads as they are removed. If the part you are looking for is not in the standard matrix below, please contact an EFC International Representative. If your part is not manufactured, EFC engineers can design exactly what you need to satisfy your unique applications.
Features and Benefits N/A
  • Lower Production Costs - faster assembly
  • Reduce Service Costs - lower maintenance
  • Anti-Vibration - prevents loosening
  • Replace Clinch-Type Fasteners - reduce material and handling costs.
Note N/A Please contact EFC International for information.