Material |
N/A Steel 1010/1008 |
Thread Size |
N/A M6 x 1.0 |
Finish |
N/A Tin-zinc with yellow Chromate (400 red Rust) |
Head Outside Diameter |
N/A 12.96 mm |
Grip Call Out |
N/A 6.6 |
Thread Call Out |
N/A 610 |
Length L |
N/A 9.50 mm |
Body Features |
N/A Radius Corner Hex Body |
End Features |
N/A Open |
Head Features |
N/A Sealed |
Maximum Dimension Il |
N/A 1.16 mm |
Maximum Insert Across Flats D |
N/A 17.40 mm |
Maximum Grip Size |
N/A 4.95 mm |
Minimum Grip Size |
N/A 3.17 mm |
Head Outside Diameter Tolerance (±) |
N/A 0.25 mm |
Mounting Hole Across Flats |
N/A 9.53 mm |
Maximum Corner Radius |
N/A 1.00 mm |
Seal Pressure |
N/A 50 psi3.4 bar |
Weathertight |
N/A Up to 50 psiUp to 3.4 bar |
Restriction of Hazardous Substances Directive Standard |
N/A No |
Industry Standards/Certifications |
N/A International Organization for Standardization (ISO) |
Features and Benefits |
N/A
|
Additional Information |
N/A For optimal performance, specify a radius corner in your hex hole to avoid stress fractures and prolong punch and die life, and use these inserts with Grade 5 or Metric Class 8.8/9.8 mating thread-locking screws. PVC Foam Seal is not recommended for use with petroleum based liquids. |