Material |
N/A Heavy Duty Galvanized Steel |
Maximum Crown Height |
N/A 0.103 in |
Minimum Crown Height |
N/A 0.067 in |
Maximum Hole Diameter |
N/A 1.255 in |
Minimum Hole Diameter |
N/A 1.252 in |
Nominal Diameter (Decimal) |
N/A 1.25 in |
Maximum Overall Height |
N/A 0.33 in |
Minimum Overall Height |
N/A 0.29 in |
Maximum Outside Diameter |
N/A 1.262 in |
Minimum Outside Diameter |
N/A 1.26 in |
Steel Thickness |
N/A 0.048 in |
Features and Benefits |
N/A
For insertion, they should be driven on the inside bottom radius, and not from the top rim of the cup. The driving arbor should be 0.015/0.025" smaller than the ID of the plug, with a flat bottom to prevent contact with the concave bottom to prevent deforming this surface. Concave Bottom |