Print Back
The unique design of these Non Removable Two-Piece Plastic Rivets provides a controlled grip range through a built-in stop on the rivet body. These rivets can be used with most standard pop-rivet setting tools. The pin breaks off when it is even with the head, providing a finished appearance on both sides of a panel. Rivets listed on this page are made from Super Tough UV Stabilized Nylon and Acetal.
Unit of Measure

Specifications

Minimum Panel Size

N/A 0.413 in

Print Reference B

N/A 0.079 in

Print Reference C

N/A 0.858 in

Maximum Panel Size

N/A 0.433 in

Maximum Hole Diameter

N/A 0.209 in

Component

N/A Male

Minimum Hole Diameter

N/A 0.197 in

Print Reference A

N/A 1.771 in

Material

N/A Acetal

Color

N/A Black

Features and Benefits

Features and Benefits

N/A The separate pin and body are each inserted from opposite sides of the panel. Most standard insertion tools pull the pin through the body and panel until the head is flush against the body stop. Additional tension causes the pin to break off.

Note

Note

N/A Additional materials and colors are also available directly through EFC International.