Thread Size |
N/A M2 x 0.4 |
Dimension B |
N/A 6.30 mm |
Dimension C |
N/A 1.50 mm |
Maximum Dimension A |
N/A 4.22 mm |
Maximum Dimension D |
N/A 1.37 mm |
Minimum Panel Thickness |
N/A 1.4 mm |
Hole Inside Diameter |
N/A 4.25 mm |
Minimum Center of Hole to Edge of Panel |
N/A 4.8 mm |
Material |
N/A Aluminum |
Features and Benefits |
N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. |