EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
J-Type U-Nuts press easily into a self-retained position over panel edges or in center panel locations. They are ideally suited for blind assembly or hard-to-reach installation. They offer floating alignment to speed production and lessen rejection. No special tools, skills or equipment are required. Riveting, welding, clinching, staking and other secondary fastening devices are eliminated.
Unit of Measure

Specifications

Panel Thickness

 N/A 0.025 0.040

Screw Size

 N/A 8A or B

Hole Diameter

 N/A 0.218 in

Width

 N/A 0.41 in

Length

 N/A 0.68 in

Material

 N/A Spring Steel

Fastener Type

 N/A U-Nut

Design Variation

 N/A AEN

Features and Benefits

Features and Benefits

 N/A U-Nuts can be applied after painting or porcelainizing panels, eliminating the need for masking or re-taping operations. The short leg provides complete visibility of the clearance hole while nut is being positioned.

Note

Note

 N/A If you need assistance exploring optional materials, finishes and/or assemblies, please contact EFC International.