EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Butt Splices are used to splice or connect wires to one another by butting their ends together inside the splice and are available in AWG 22 - 1/0 wire sizes.
Unit of Measure

Specifications

Type

 N/A Butt Wire

Inside Diameter

 N/A 0.138 in3.50 mm

Outside Diameter

 N/A 0.223 in5.70 mm

Length

 N/A 0.827 in21.00 mm

Barrel Style

 N/A Non Insulated

Wire Size

 N/A 12/10 AWG

Barrel Features

Barrel Features

 N/A
  • Seam Welded Shut
  • Ideal for Hard-to-Crimp Solid and Stranded Wires
  • Can be crimped from any angle.

Features and Benefits

Features and Benefits

 N/A The wires are inserted from either end and butt against a built-in wire stop. Then the connector is crimped in two places, one for each wire, holding them securely in place. Their seams are brazed, so they will not open under conditions of stress or pull. They are very versatile and can be crimped under most adverse conditions by many types of tooling.