TOOLS - RIV990 and RIV991 Hexcutter for Hexagonal Holes
RIV990 and RIV991 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts.
The RIV990 cuts hex hole sizes for #8-32 to 5/16 inches and M4 to M8. RIV991 cuts #10-32 to ½ inches and M5 to M12 hex hole sizes.
Nose pieces for each tool are sold separately.
Notes for below chart:
(1) Tool Weight shown with nose piece.
(2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
(3) Tool Weight shown without nose piece.
|EFC Part Number||Tool Weight||Min. Hose Size||Air (2)||Air Use||Max. Axial Pulling Load I.D.||Max. Stroke|
|06A2986300||5.07 lbs (2.3 kg)||3/8 inches (9.5 mm)||90 PSI (6 BAR)||152.6 cu in (2.5 liters)||4271 lbs @ 90 PSI (19 kN @ 6 BAR)||.236 inches (6 mm)|
|06A4630400||5.29 lbs (2.4 kg)||3/8 inches (9.5 mm)||90 PSI (6 BAR)||152.6 cu in (2.5 liters)||4721 lbs @ 90 PSI (21 kN @ 6 BAR)||.472 inches (12 mm)|