Archive: May 2020


Leave a Comment

“Lightweighting” has certainly been a buzz word the past few years for anything on wheels! In 2018 GM unwrapped the 2019 Chevy Silverado 1500. Through extensive use of mixed materials, the new truck weighs less than the outgoing model—up to 450 pounds less for some versions. “The weight savings comes from extensive use of mixed materials and advanced manufacturing processes throughout the next-gen truck,” says Tim Herrick, executive chief engineer of full-size trucks at GM. “This allowed us to use the right material for the application and optimize every component for mass, durability, safety and functionality to meet our customers’ needs.”

“I don’t know of any OEM that isn’t targeting at least one weight class reduction on new models that they’re developing. Over the next two decades, we expect to see incremental improvements in weight reduction on every new vehicle and every new component. This is a never-ending battle and every component is being challenged.” – Stated by Alan Taub who previously worked in R&D at Ford, GM and GE and now of Lightweight Innovations for Tomorrow (LIFT).

Fastening and assembly in lightweight materials creates many challenges. In steel, we can weld, pierce, clinch, bolt and more. In composite materials we must develop unique methods of fastening that do not require high forces and temperatures. The BBA blind rivet nut allows flexibility with unique strength and corrosion resistance in composites and metals. BCT® (Bulge Control Technology) allows the rivet nut to install quickly, clamp into material without any radial expansion in the hole, and control the collapse to ensure there is no damage to material.

Producing BCT® rivet nuts from aluminum for use in aluminum and magnesium, weight is reduced dramatically. In areas using advanced high strength steel, when welding is not currently advisable and self-piercing fasteners are not hard enough to join materials properly, the BBA Ultra Series Rivet nuts can reach Torque level adequate to break a Grade 12.9 bolt with torque. Using high strength steel materials, the cold forming process yields a very strong fastener, but allows proper installation with conventional rivet nut tools.

The BCT fastener has the same grip range capability of up to three standard rivet nuts. BCT rivet nuts can be placed near to the edge of the sheet without fear of inducing a crack in the sheet.  Available in hexagon body for the ultimate in joint performance.

BCT can be installed in areas with limited rear side clearance. An M6 rivet nut needs only 8mm of rear side clearance prior to installation and only 5mm after installation –perfect for use in thinner versions of sandwich materials, avoiding the need for a through hole.


EFC will work with you to overcome challenges, find alternatives and develop processes to reduce weight.

O Fastener Tree, O Fastener Tree

Leave a Comment

Our employees were asked to put together some festive ornaments using the same fastening solutions we supply. The end result was astounding!

Please keep EFC International in mind for any project you may have in your workshop. You never know what our elves will come up with.

O Fastener Tree

On behalf of EFC International, we wish you and yours a Happy Holiday Season.

Shake, Rattle & Roll!

Leave a Comment

Do You Have Joint Challenges – vibration, loosening, heat, etc.?  ITW Shakeproof developed the BosScrew™ to meet the challenge.  The unique thread form works directly with the creeping aspect of plastic to interlock with the boss. The BosScrew utilizes standard head diameters and has the highest drive-to-strip ratio in the industry.  This is the maximum performance fastener for most plastic applications.


  • Reduce parts in an assembly – no more inserts
  • Permits the design of shorter bosses – save material
  • No spring components needed in the jointShake, Rattle & Roll™
  • Savings in service issues due to fasteners

BosScrew Success:

  • Automotive – center consoles, seat tracks, fascia bracket, door zone, grab handle
  • Small Engine – carburetor stud
  • Heavy Truck – air deflector
  • Construction – weatherstrip to door
  • Lawn Mower – handle assembly, clutch assembly
  • Furniture – church chairs

And we’ve got them in stock. Leave Shake, Rattle & Roll to Bill Haley and his Comets!

Do You Need to Bundle Your Bungled Application?

Leave a Comment

EFC is a stocking master distributor for HellermannTytonmanufacturer of solutions that help customers manage wire, cable and components.  EFC carries a wide range of products and will assist you in finding the perfect solution to fit your application.  For bundling & securing products, electrical installation, identification, network connectivity, routing, protection and insulation check us out.

What are you trying to do – Bundle, Secure, Bundle & Secure or Separate Bundles?  If you ask, what’s the difference?  Here you go:

Bundle – wires, tubes, etc. together – NOT connecting a bundle to a surface.  Do you have a heavy-duty application? Heavier than 120 lbs.

Do You Need to Bundle

Secure – primarily mounts (you will need a secondary part for bundling).  In addition, products that connect two parts like hoses.

Do You Need to Bundle

Bundle & Secure – to an edge, to an existing hole, to a stud, or with something else like a screw, bolt or nail.

Do You Need to Bundle

Separate Bundles – in some cases, they also mount to a surface.  Do you want to separate bundles with a range of sizes or fixed size?

Do You Need to Bundle

International Fastener Expo (IFE) 2018

Leave a Comment

Congratulations to Brian Rzepka of Valley Fastener Group, winner of EFC’s booth give-away, Xbox One!  Thanks to everyone who stopped by the booth to register to win at IFE (International Fastener Expo).

A hot topic at the show and, of course, industry wide was what to expect in 2019 on U.S. Tariffs and Trade Policy. The new regulations have added more projects on desks for learning how to navigate through the lists, logistics, and strategize on how to manage price increases.  Some networking within the industry and taking advantage of workshops, webinars or conferences will, I hope, ease the burden.

We will see everyone next year a little earlier in September at IFE.

International Fastener Expo (IFE) Logo

GIE Expo 2018

Leave a Comment

GIE Expo 2018

EFC International will be exhibiting again at the GIE Expo (Green Industry & Equipment Expo) in Louisville October 17-19, Booth 10018 in the OEM Supplier Pavilion. This is the largest show for the industry and includes outdoor demonstration areas. Exhibitors at the show include Briggs & Stratton, The Toro Company, Caterpillar, Echo, John Deere Company, Kohler, Stihl, Kubota, Makita, and hundreds more.

Products highlighted in the EFC booth will include HellermanTyton’s Ratchet P clamp, an innovative wire bundling solution for heavy equipment manufacturers who want to reduce costs without compromising performance. It features an adjustable ratchet clamp mechanism; it comes in four sizes, four mounting configurations and two metal base materials. Cut the time required for wire harness and cable installation!

Oetiker Irrigation Service Kit with clamps and jaw pincers are perfect for clamping in a variety of diameters.  The clamps are made of stainless steel to resist scaling and corrosion for at least 1000 hours of salt spray.  We will be giving away two of these kits so stop by and register to win!  Oetiker high-tech hose and tubing connections used throughout the industry ensure a leak-proof, durable hose connection.

Also on display, StockCap, handgrips, vinyl, rubber and plastic plugs and caps for product protection. Whether you need a standard tube end cap or a custom part designed to your specifications, EFC will work with you to find the solution that works.

ARaymond designs and manufactures fasteners for the green industry.  Clips, supports and hooks enable growers to simplify, maximize yields and minimize labor costs.  ARaymond offers a range of biodegradable (who knew?!) fastening solutions in addition to its plastics range.

Heyco introduced this year UL recognized thermoplastic rubber grommets for mounting hole diameter ranges of .375” to 2.000”.   Convert raw-edged holes to smooth, neat, insulated holes.  You have the ability to insulate and mechanically protect cable, tubing, hose, rope, rods, and shafts.  Diameters fit panel thicknesses from .03” to .13”.  The temperature range is -40ºF to 221ºF.

Sherex introduced a line of M10 full hex structural rivet nuts perfect for high performance, high strength fastening solutions and needed for this industry.  The OEM they worked with was having challenges with weld nuts in the frame assembly.  They had to mask and unmask the weld nut threads before and after the powder coast process. These extra steps caused delays in the manufacturing process. Using the new M10 rivet nuts with the Sherex FLEX-18 installation tool, reduced production time by 20 minutes per frame assembly. Talk to us at the show about more cost saving solutions.

Recently introduced to the show are UTVs (Utility Task Vehicles).  As a premier provider to the automotive and truck industry, EFC is a natural solution and go-to source for fastening UTVs – including wire routing, clamps, panel fasteners, handles, knobs, specialty screws, and connectors. If you’re wondering what the difference is between a UTV and an ATV as I was, here you go — ATVs are all terrain vehicles and smaller than a UTV and they’re recreational.  UTVs also called side by sides are off-road vehicles that can seat 2-4 and designed for rougher terrain, hauling – a.k.a. work!

And one more exciting give-away – as if the Oetiker Irrigation Clamp Kits weren’t enough, we have a remote control excavator to give away.  It’s the envy of the guys in the office and now on their Christmas list.

See you in Louisville at GIE Expo!

Clamps, Clamps, and More Clamps!

Leave a Comment

The most popular types of clamps for hose/tube, wire routing and affixing.Clamps

Regardless of your application – hose/tube, wire routing or affixing – there are numerous types of clamps to fit your application solution.  Many of these types of clamps appear in EFC’s on-line engineering guide (EFC Product Catalog of Engineered Components), specifically in our clamp “book” found here.  The most popular clamp types include constant tension, crimp style, cushion/routing, worm-gear, T-bolt and V-band.

Constant Tension clamps come in various styles (CTB band, screw-drive w/ spring element or belleville washers, or with traditional springs).  Constant Tension clamps enable spring-action to ensure a “constant tension” to prevent hose leaks due to pressure changes or thermocycling.

Crimp Style clamps include ear clamps that require an “ear” to be pinched to install.  Advantages include ease of installation, tamper proof design, concentrated seal compression and are ideal for hard-to-seal applications like molded plastics and automotive applications.

Cushion and Routing clamps include metal “P clamps”, with or without a cushion, for affixing hose, tubes, pipes, cables or wire bundles.  The clamps are affixed typically by using a bolt.  Other types of routing clamps include both metal and plastic clamps of varying styles and designs for affixing or routing cables and wire bundles.

Worm-gear clamps are extremely popular as they can be removed or adjusted after installation and typically just require a screw-driver to install them.  They come in varying styles for numerous application solutions.  Worm-gear clamps can accommodate a range of diameters, which is a major benefit.

T-Bolt clamps are often used for heavy duty / high strength applications.

V-band clamps provide a secure connection and positive sealing for “coupling” together flanged joints.  Available for high torque and with quick latch options.  These clamps are often used in heavy-duty diesel engine exhaust and turbochargers.

For more information, or to explore any of these types of clamps (and others), please visit the clamp section of our website here.

ARaymond Hose and Tube Clips

Leave a Comment

Electrical systems – fastening and assembly solutions.  EFC’s strong partnership with experts in electrical systems like ARaymond, allows our customers access to plastic and metal fastener solutions designed specifically for electrical systems.


EFC offers robust cable and tube fasteners providing improved security, performance and retention.  Modular swivel clips feature male and female parts in combination to create tailor-made fasteners.  The added swivel function means that the clips are compatible with multidirectional mountings, parallel cables and multiple routing.  A wide range of cable and tube holders made to fix one or more wires to a panel covering all common diameters and a wide range of panel thickness with different anchoring systems like studs, holes or panel clips.  Mix and match to create your ideal solution.

Corrugated hose clips are designed for placement around corrugated tubes of wiring assemblies to prevent fasteners from moving along wiring bundles.  We also offer low profile clips designed for space saving and mounting clips that can be easily opened for temporary access/removal and closed again to secure the conduit.  Engine or exhaust applications– – we also offer metal clips manufactured for high temperature performance requirements.

Contact EFC to optimize your production line’s efficiency with ARaymond’s robust, vibration-free fastening solutions!