EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
PVC Flexible Liquid-Tight Conduit is made from integral rigid and flexible PVC construction, and is available in 3/8" thru 2" trade sizes. Approved for direct burial. Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.

Use with our nylon Flexible Connectors - Straight, Sweep, Snap-In and Twist & Snap, located in the "Liquid-Tight Connectors" section of our Electrical catalog. Mounting Brackets may be found in this section as well.

Passes submersion test of 70 psi.
Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
Unit of Measure
Items Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
20300125-NM7I
0.632 Inch (in) Inside Diameter Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduit 		Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
20300336-PV07
1.395 Inch (in) Inside Diameter Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduit 		Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
20300337-PV07
1.588 Inch (in) Inside Diameter Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduit 		Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
20300338-PV07
2.033 Inch (in) Inside Diameter Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduit 		Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduits
20704003-A070I
0.830 Inch (in) Inside Diameter Flexible Polyvinyl Chloride (PVC) Liquid-Tight Conduit
Description N/A PVC Flexible Liquid-Tight Conduit is made from integral rigid and flexible PVC construction, and is available in 3/8" thru 2" trade sizes. Approved for direct burial. Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.

Use with our nylon Flexible Connectors - Straight, Sweep, Snap-In and Twist & Snap, located in the "Liquid-Tight Connectors" section of our Electrical catalog. Mounting Brackets may be found in this section as well.

Passes submersion test of 70 psi.
Material N/A Polyvinyl Chloride (PVC)
Color N/A Gray
Dry Temperature Rating N/A 176 ºF80 ºC
Oil Resistance Temperature Rating N/A 160 ºF70 ºC
Wet Temperature Rating (Locations) N/A 140 ºF60 ºC
Inside Diameter N/A 0.632 in16.10 mm N/A 1.395 in35.40 mm N/A 1.588 in40.30 mm N/A 2.033 in51.60 mm N/A 0.830 in21.10 mm
Outside Diameter N/A 0.830 in21.10 mm N/A 1.645 in41.80 mm N/A 1.883 in47.80 mm N/A 2.358 in59.90 mm N/A 1.040 in26.40 mm
Trade Size N/A 1/2 in N/A 1-1/4 in N/A 1-1/2 in N/A 2 in N/A 3/4 in
Standard Coil Length N/A 100 ft N/A 100 ft N/A 50 ft N/A 50 ft N/A 100 ft
Weight N/A
Flammability Rating N/A VW1
Industry Standards/Certifications N/A Listed under Underwriter's Laboratories File #E-51579; Certified by Canadian Standards Association File #LR-93876.
Features and Benefits N/A
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • Resists abuse, pull, and crushing.
  • Lightweight and lower installed cost.
  • Suitable for indoor/outdoor use: HVAC Equipment, Machine Tools, Marine Equipment, Motors and Controls, Printing Equipment, Pumps, and Refrigeration Equipment.