Corrugated Nylon (PA12) Flexible Liquid-Tight Conduit is made from extremely flexible Polyamide 12 Nylon, standard weight. These are particularly suited to robotics, automation, and/or continuous flexing. They are designed to be used with the Nylon PA66 Liquid-Tight Fittings featured in our Electrical Engineering Guide (straight, 90º, or 45º). These conduits are available in 13 mm thru 54 mm nominal sizes.

Corrugated Nylon (PA6) Flexible Liquid-Tight Conduitis made from extremely flexible Polyamide 12 Nylon, standard weight. These are particularly suited to robotics, automation, and/or continuous flexing. There are designed to be used with the Nylon PA66 Liquid-Tight Fittings featured in our Electrical Engineering Guide (straight, 90º, or 45º). These conduits are available in 13 mm thru 54 mm nominal sizes.

This Flexible High Impact Tubing is available in 25ft rolls as an add-on to our Fittings Kits. Made from 85D Polyurethane, it offers excellent resistance to chemicals, kinking, abrasion, hydrolysis, oxidation, and ozone exposure, and is available in 3 standard sizes.

PVC Flexible Liquid-Tight Conduit is made from integral rigid and flexible PVC construction, and is available in 3/8" thru 2" trade sizes. Approved for direct burial. Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.

Use with our nylon Flexible Connectors - Straight, Sweep, Snap-In and Twist & Snap, located in the "Liquid-Tight Connectors" section of our Electrical catalog. Mounting Brackets may be found in this section as well.

Passes submersion test of 70 psi.

FLEXIBLE PVC Liquid-Tight TUBING is ideal for fiber optic cable protection, and suitable for use in high vibration or flexing applications. This tubing has maximum flexibility, and can be used in extremely tight quarters. They are made from PVC for corrosion, oil and water resistance, and are available in 1/4" thru 2" trade sizes..

PG Thread Taps for steel conduit threads per DIN 40430 are available in 7 sizes. Use a starting tap for through-hole applications.

V-Slit Flexible Nylon Tubing comes in 13 sizes 1/8" to 1-1/2". The slit design allows side entry and encirclement of pre-assembled harness and capillary tubes, and allows for wire breakouts. Nylon 6/6 makes them resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.