EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These Push-ons are non-removable thin wall shaft retainers that press over studs or shafts to become an integral part of an axial application. They replace snap or bearing rings, cotter pins, staking, swaging, spinning, heat-forming, ultrasonic, coining, cementing, or upsetting, to eliminate high-cost operations.
Push-On Thin Wall Shaft Retainers
Push-On Thin Wall Shaft Retainers - 2
Unit of Measure
Items Push-On Thin Wall Shaft Retainers
01567140-00Q
0.300 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer 		Push-On Thin Wall Shaft Retainers
01T9922016227
0.437 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer 		Push-On Thin Wall Shaft Retainers
70003081
0.750 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer 		Push-On Thin Wall Shaft Retainers
01567099-00Q
0.405 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer 		Push-On Thin Wall Shaft Retainers
01567103-1900Q
0.305 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer
Description N/A These Push-ons are non-removable thin wall shaft retainers that press over studs or shafts to become an integral part of an axial application. They replace snap or bearing rings, cotter pins, staking, swaging, spinning, heat-forming, ultrasonic, coining, cementing, or upsetting, to eliminate high-cost operations.
Weight N/A
Finish N/A Degreased, clean and free of oil; Passivated stainless steel; Soluble oil dipped; Phosphate and oil; Phosphate plus 2 coats of black paint
Material Thickness (Decimal) N/A 0.022 in N/A 0.014 in N/A 0.025 in N/A 0.022 in N/A .006 in
Hole Diameter N/A 0.192 in N/A 0.150 in N/A 0.237 in N/A N/A 0.116 in
Part Diameter N/A 0.300 in N/A 0.437 in N/A 0.75 in N/A 0.405 in N/A 0.305 in
Stud Diameter N/A 1/5 in N/A 0.162 in N/A 0.248 in N/A 1/5 in N/A 1/8 in
Material N/A 300 Series Stainless Steel (Preferred)
Features and Benefits N/A Designed without slots or shears, these Push-ons will not "walk-off" or spring free. Their low-profile, flat design makes them ideal for limited access locations. Quality stainless steel assures long life, corrosion resistance, minimal distortion, and a dry finish while eliminating heat treat, finish and handling operations and associated extra costs.