EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These brass Standard Solid Knurled Compression Limiters have one or two knurled bands for excellent retention in plastic hosts. These Limiters can be used with up to ISO Class 8.8 and SAE Grade 5 bolts. Compression Limiters protect threaded joint integrity in plastic hosts. Tightening a bolt to its required value compresses the plastic and causes creep, loosening and eventual failure of the joint itself. Compression Limiters absorb the load and protect the plastic.

Compression limiters - heavy duty molded-in.
Unit of Measure

Specifications

Type

 N/A Compression

Material

 N/A Low Carbon Steel

Finish

 N/A Trivalent (Hex-Free) Zinc

Inside Diameter

 N/A 8.80 mm

Outside Diameter

 N/A 12.8 mm

Length L

 N/A 15.00 mm

Nominal Bolt Diameter

 N/A M8

Thickness T

 N/A 2 mm

Features and Benefits

Features and Benefits

 N/A
  • Anti-Rotational - Single OD vertical groove at the seam prevents rotation
  • Lead-In ID Chamfer - for fast and efficient application
  • 2 Standard ID Ranges - Increased clearance for overall positioning and alignment in final assembly or reduced clearance around core pins