Compression Limiters, also known as Anti-Creep Rings, are plain hole metal inserts designed for use in plastic mold components. It provides bolt clearance, while the wall of the compression limiter withstands the compressive force induced during the assembly of the mating screw or bolt. Commonly, compression limiters are installed using a simple cold press assembly method.

119400505-ZN8B – round

253001316-ZN5-R2 – oval

Make the switch! GRIPTIDE™ Steel Threaded Inserts for Plastics are made from cold formed steel at lower material and manufacturing costs while still exceeding minimum torsion and pull out requirements.

PressLoc® Compression Limiters & Bolt Sleeve Assemblies enable metal-to-plastic conversion for critical components. Plastic components can be securely fastened without over-stressing the plastic while maintaining bolt load.

These Solid Heavily-Knurled Compression Limiters have a wider area of knurling than the 1 or 2 bands on the Standard Knurled version. Compression Limiters protect the plastic components of an assembly from the compressive loads generated by the tightening of bolts. These Brass Limiters featured on this page are available in 6 sizes, without flanged heads, as listed.

These Solid Heavily-Knurled Compression Limitershave a wider area of knurling than the 1 or 2 bands on the Standard Knurled version. Compression Limiters protect the plastic components of an assembly from the compressive loads generated by the tightening of bolts. The Brass Limiters featured on this page are available in 6 sizes, with or without flanged heads, as listed.

These brass Standard Solid Knurled Compression Limiters have one or two knurled bands for excellent retention in plastic hosts. These Limiters can be used with up to ISO Class 8.8 and SAE Grade 5 bolts. Compression Limiters protect threaded joint integrity in plastic hosts. Tightening a bolt to its required value compresses the plastic and causes creep, loosening and eventual failure of the joint itself. Compression Limiters absorb the load and protect the plastic.

These brass Standard Solid Knurled Compression Limiters have one or two knurled bands for excellent retention in plastic hosts. These Limiters can be used with up to ISO Class 8.8 and SAE Grade 5 bolts. Compression Limiters protect threaded joint integrity in plastic hosts. Tightening a bolt to its required value compresses the plastic and causes creep, loosening and eventual failure of the joint itself. Compression Limiters absorb the load and protect the plastic.

Compression limiters - heavy duty molded-in.