EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These Knurled Inserts for Thicker Panels have tiny knurls under their head, and are designed to be installed into most materials over 0.030in/0.76mm in thickness. Their reduced length makes them ideal for limited clearance applications. They can be installed using lightweight, handheld pneumatic tools that can be located at any position in your assembly sequence. As the insert is installed, the threaded nut portion is drawn into the upper sleeve portion. This 360º swaging action expands the sleeve to firmly hold the insert in position in the hole. They are to be used with Grade 8/Metric 12.9 mating screws.
Unit of Measure

Specifications

Thread Size

 N/A 3/8-16

Finish

 N/A Plain Zinc No Clear Coat

Mounting Hole Diameter

 N/A 0.770 in

Head Outside Diameter

 N/A 0.588 in

Maximum Dimension D

 N/A 0.561 in

Body Features

 N/A 360º Swaging

End Features

 N/A Open

Head Features

 N/A Knurl

Length

 N/A 0.745 in

Reference LB

 N/A 1.450 in

Maximum IATD

 N/A 0.890 in

Maximum Dimension Il

 N/A 0.390 in

Length LB

 N/A 1.095 in

Material

 N/A Aluminum 6061-T6

Thread Call Out

 N/A 616

Restriction of Hazardous Substances Directive Standard

 N/A Yes

Industry Standards/Certifications

 N/A Unified National Coarse (UNC)

Features and Benefits

Features and Benefits

 N/A
  • Thick Panel Applications
  • Limited Clearance Applications - reduced overall length
  • Reduce Inventory- each of these inserts can be used in almost any thickness
  • Varying Thickness Materials without adjustment
  • Quality Installation - Locate special spin/spin torque stall tools anywhere in assembly, even in variable thickness materials, before or after finish.

Additional Information

Additional Information

 N/A These inserts are available with standard open ends, or closed ends to prevent leakage past the threads from either side of the application.

Note

Note

 N/A Special Installation tools are available through EFC International. Design options without knurls under the head are also available directly through EFC. Special orders are subject to minimum order requirements.