EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These Straight PG/NPT Nylon Liquid-Tight Fittings are available in five sizes for 1/4" through 1". They are for use in both wet and dry locations. They have a low profile for a discrete and clean appearance. These fittings are designed for use with the Flexible, Non-Metallic Tubing listed in "Liquid-Tight Conduit/Tubing" section of our Electrical catalog.Use of an o-ring may be required for a complete, liquid-tight system.Locknuts are also available. Please refer to the "Liquid-Tight Locknuts" section of our Electrical catalog.
Unit of Measure

Specifications

Flammability Rating

 N/A Halogen Free 94V-0

Material

 N/A Nylon 6/6

Thread Size

 N/A 1/2 in

Thread Type

 N/A National Pipe Thread (NPT)

Thread Length

 N/A 0.620 in15.90 mm

Wrench Flats

 N/A 1.180 in30.00 mm

Fits Conduit Size

 N/A 1/2 in

Nut Thickness

 N/A 0.200 in5.10 mm

Maximum Overall Length

 N/A 1.72 in43.70 mm

Clearance Hole Size

 N/A 0.875 in22.30 mm

Features and Benefits

Features and Benefits

 N/A
  • Easy, permanent assembly: the installer pushes the tubing over the connector ferrule until the tubing "clicks" into place.
  • Cost effective, lightweight nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

Note

Note

 N/A Takes O-Ring