90º Sweep NPT Economy Nylon Liquid Tight Fittings are cost-saving and UL approved for use with the Flexible PVC Liquid Tight Conduits found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and are a low-cost, one piece solution with smooth internal surfaces for easier wire routing, protection and installation around corner angles. Their all nylon construction provides resistance to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Locknuts are also available. Please refer to the "Liquid Tight Locknuts" section of our Electrical catalog.

90º Liquid Tight NPT Fittings are an easy way to create permanent assembly between tubing and fittings. Simply push the tubing over the fitting ferrule until tubing "clicks" into place. Liquid Tight Fittings are available in 4 sizes, low cost and light weight for use in both dry and wet applications. The use of an O-ring may be required for a complete liquid tight system with a non-threaded mounting hole.

90º Sweep Metallic Conduit Fittings are designed specifically for electrical applications in conjunction with the Flexible PVC Liquid Tight Conduit and Flexible PVC Liquid Tight Tubing offered in our Electrical Engineering Guide. Their cost-effective die-cast zinc construction provides durability and resists rough environments.

90º Sweep Nylon (PA66) NPT Fittings are designed for use with 16mm thru 67mm flexible, corrugated nylon conduit/tubing. They are Low Fire Hazard all nylon construction for superior protection, and come in 6 NPT thread sizes for use with 7 conduit sizes.

These 90º Sweep NPT Nylon Liquid Tight Fittings are available in seven sizes from 3/8" through 2" for use with flexible, nonmetallic Liquid Tight Conduit & Tubing listed in the "Liquid Tight Conduit/Tubing" section of the Electrical catalog. They have smooth internal surfaces for easier wire installation around the corner angles. Use of a Sealing Washer may be required for wet locations. Please refer to the "Liquid Tight Sealing Washers" section of the Electrical catalog. In addition, Locknuts can be found in the "Liquid Tight Locknuts" section of our Electrical catalog for ordering information.

These 90º Sweep Snap-In Nylon Liquid Tight Fittings are cost-saving and UL approved for use with Flexible PVC Liquid Tight Tubing found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all- Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing). Optional Collars (Black and Gray) are also available, to neaten rough cut tubing ends, and are listed below. Locknuts are listed in the "Liquid Tight Locknuts" section of our Electrical catalog.

These Metal Plug Fittings will fit 1/4" DN6 Swing Couplings featured in our Couplings section. They are available with Male or Female thread, or Hose Stem design. Used with the Swing Couplings, they will provide easy and safe connection without force or loss of pressure. Free flow is guaranteed!

These Metal Plug Fittings will fit 3/8" DN8 Swing Couplings featured in our Couplings section. They are available with Male or Female thread, or Hose Stem design. Used with the Swing Couplings, they will provide easy and safe connection without force or loss of pressure. Free flow is guaranteed!

These Metal Plug Fittings will fit 3/8" DN8 Swing Couplings featured in our Couplings section. They are available with Male or Female thread, or Hose Stem design. Used with the Swing Couplings, they will provide easy and safe connection without force or loss of pressure. Free flow is guaranteed!

These Metal Plug Fittings will fit 3/8" DN8 Swing Couplings featured in our Couplings section. They are available with Male or Female thread, or Hose Stem design. Used with the Swing Couplings, they will provide easy and safe connection without force or loss of pressure. Free flow is guaranteed!

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

Famous Kinglok® design of these Zerks seals out oil & moisture, while a surface ball check blocks dirt.

HEYCO® Nylon Liquid-Tight Finishing Collars will neaten rough cut tubing ends and are designed to be used with the Quick Twist Nylon Liquid-Tight Fittings featured in this section.

Heyco-Flex™ III Liquid Tight Tubing has extreme flexibility and can be used in very tight quarters. There is no threading of the tubing required for installation. This eliminates the possibility of cutting the tubing and creating leak paths. Drag on wiring is reduced by the rounded internal corrugations. Heyco-Flex™ III Liquid Tight Tubing is both lightweight, resists corrosion, oil, water and many chemicals. The tubing can be used in many applications such as: HVAC, Automotive Equipment, Fiber Optics, Computer and Peripherals, Lab Equipment, Medical Equipment, Motors and Generator, Pumps, Control Panels, Hydraulic Lifts, and Scientific and Other Instruments.

These Metal Plug Fittings will fit 1/2" DN11 Swing Couplings featured in our Couplings section. They are available with Male or Female thread or Hose Stem design. Used with the Swing Couplings, they will provide an easy and safe connection without force or loss of pressure. Free flow is guaranteed!

Standard Specialty Fittings Kits feature a large assortment of Fittings, Sleeves, Plugs & Connectors suitable for use in liquids, pneumatic controls, fluid dampers, automation equipment, laboratory use and engineering design. Two standard designs and materials. Optional flexible tubing can be added separately.

Straight Metallic Conduit Fittings are designed specifically for electrical applications. Their cost effective die-cast zinc construction provides durability and resists rough environments. They fit the 1/2" and 1/4" PVC Liquid Tight Conduit and Tubing we offer in the Conduit and Tubing section of our Electrical Engineering Guide.

Straight Metric Nylon (PA66) Liquid-Tight Fittings are designed for use with sizes 10mm thru 67mm Corrugated Nylon PA6 and PA12 Flexible Conduit we feature in our Electrical Engineering Guide. These all nylon fittings come in 8 metric thread sizes for use with 9 conduit sizes.

These Straight NPT Threaded Economy Nylon Liquid-Tight Fittings offer cost savings and are UL approved for use with Liquid-Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing) Optional Black and Gray Collars are also available, to neaten rough cut tubing ends, and are listed. Locknuts are listed in the "Liquid-Tight Locknuts" section of our Electrical catalog.

Straight Nylon (PA66) NPT Fittings are for use with 16mm thru 67mm Corrugated Nylon Polyamide 6 and Corrugated Nylon Polyamide 12 Liquid-Tight Conduit Tubing. These all-Nylon, Low Fire Hazard fittings are available in 7 NPT threaded choices for use with 7 different conduit sizes.

Straight Nylon (PA66) NPT Fittings are for use with 16mm thru 67mm Corrugated Nylon Polyamide 6 and Corrugated Nylon Polyamide 12 Liquid-Tight Conduit Tubing. These all-Nylon, Low Fire Hazard fittings are available in 7 NPT threaded choices for use with 7 different conduit sizes.

These Straight PG/NPT Nylon Liquid-Tight Fittings are available in five sizes for 1/4" through 1". They are for use in both wet and dry locations. They have a low profile for a discrete and clean appearance. These fittings are designed for use with the Flexible, Non-Metallic Tubing listed in "Liquid-Tight Conduit/Tubing" section of our Electrical catalog.Use of an o-ring may be required for a complete, liquid-tight system.Locknuts are also available. Please refer to the "Liquid-Tight Locknuts" section of our Electrical catalog.

These Straight Snap-In Economy Nylon 6/6 Liquid Tight Fittings offer extra cost-savings and are UL approved for use with Liquid Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing)Optional Black and Gray. Collars also available as listed below, to neaten rough cut tubing ends. Locknuts are listed in the "Liquid Tight Locknuts" section of our catalog.

These Straight Snap-In Nylon (6/6) Liquid Tight Fittings with Domed Nuts are assembly friendly! The installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be "snapped" into the chassis with fingertip pressure. They are available in five sizes, 1/4" thru 1" for use with Flexible Conduit and Tubing listed in the "Liquid Tight Flexible Conduit/Tubing" section of our Electrical catalog.

These valve-free 1/2" DN11 H Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN11 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

These valve-free 1/4" DN6 A1 Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN6 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

These valve-free 1/4" DN6 B1 Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN6 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

These valve-free 3/8" DN8 D Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN8 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

These valve-free 3/8" DN8 E Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN8 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".