Spring-Action Stainless Steel UNICLAMPS™ provide constant leak proof security for low pressure applications in applications requiring Stainless Steel. Their wide 6-9mm band-width ensures improved clamping action without hose damage, and a low cost solution for high volume production.

Constant Tension Bands are the ideal fasteners for hose-spigot connections which are submitted to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is pre-opened and pre-positioned on the hose. These spring band clamps are quick to assemble and easy to install and their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm, and will accommodate nominal diameters from 13 up to 80 mm.

Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, (and if desired, pre-positioned on the hose) these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.

Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.

Oetiker® Stepless® Self-Compensating Constant Tension Clamps are specifically developed to permanently stop cold leaks with black EPDM or soft silicone coolant system hoses on diesel or other engines. Their narrower band width & precise tongue-in-groove stepless interior, coupled with a low installation torque, achieves a strong uniform 360º seal. The preloaded spring tension effectively compensates for common coolant leakage during thermal cycle changes.

Self-Compensating Screw Drive CTB Clamps eliminate "cold flow" leakage by shutting off the leak paths. These clamps provide the self-adjusting band you need for a dependable seal, even in the coldest conditions. Our standard version offers a lined 9/16" wide stainless steel band with a 5/16" hex-head screw.

Torro® Worm Gear Clamps with Integrated Springs add an automatic self-adjusting constant tension to the 9 or 12mm asymmetric worm drive clamp. Tightening the screw loads the spring with enough clamping force to ensure a long-lasting automatic re-tensioning effect, even in very low temperatures. The self-adjusting radial clamping force achieved makes these ideal for applications under extreme temperature changes (e. g. charged air) or for the retention of hoses with a tendency of "creeping" (hose relaxation). They are particularly suited to connecting cooling and heating hoses.

Double Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to meet the performance requirements specified.

Single Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to perform in low pressure applications where temperatures fluctuate.

Slim Design Single Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to perform in low pressure applications where temperatures fluctuate.

These handheld pliers are designed specifically to install UNICLAMP™ HOSE CLAMPS.

Each Make-A-Clamp Kit is a total maintenance worm gear clamp system in a box, from which can be made over 1000 SAE Sizes of clamps. Each kit consists of 1 continuous roll of Perforated 1/2"-wide Stainless Steel Banding plus adjustable Stainless Steel Aero-Seal Worm-Gear Assembly Fasteners with 400SS Hex Head Screws. These kits are superior to and more versatile than "crimp & buckle" banding and strapping fasteners, and are ideal for anyone who requires varying sizes of large re-usable worm gear clamps. Table below lists complete kits as well as replacement pieces for kits, as explained.