GRIPTIDE™ Steel Threaded Inserts for Plastics
Metal Compression Limiters
Make the switch! GRIPTIDE™ Steel Threaded Inserts for Plastics are made from cold formed steel at lower material and manufacturing costs while still exceeding minimum torsion and pull out requirements.
Unit of Measure
Items |
24A300090-100X-R1 GRIPTIDE M5X.8-6H 9.5OAH 9.5ZTC |
24A000493-100XMP GRIPTIDE M6x1.0-6HX10.5 11FLG ZNKLAD/SLV |
24A000559E-100X GRIPTIDE M6X1.0X12.7 14FL ZNKLD/SLV |
|||
Description |
N/A
Make the switch! GRIPTIDE™ Steel Threaded Inserts for Plastics are made from cold formed steel at lower material and manufacturing costs while still exceeding minimum torsion and pull out requirements. |
N/A Make the switch! GRIPTIDE™ Steel Threaded Inserts for Plastics are made from cold formed steel at lower material and manufacturing costs while still exceeding minimum torsion and pull out requirements. | N/A Make the switch! GRIPTIDE™ Steel Threaded Inserts for Plastics are made from cold formed steel at lower material and manufacturing costs while still exceeding minimum torsion and pull out requirements. | |||
Material | N/A Cold Formed Steel | N/A | N/A | |||
Features and Benefits |
N/A
|
N/A | N/A | |||
Nominal Size | N/A M5 | N/A M6 | N/A M6 | |||
Pitch | N/A 0.80 mm | N/A 1.0 mm | N/A 1.0 mm | |||
Thread | N/A INT | |||||
Length | N/A 9.5 mm | N/A 10.5 mm | N/A 12.7 mm | |||
Flange Diameter | N/A 9.5 mm | N/A 11 mm | N/A 14 mm | |||
Head Height | N/A 1.30 mm | N/A 1.25 mm | N/A 1.25 mm | |||
Outside Diameter | N/A 9.5 mm | N/A 9.73 mm | N/A 9.73 mm | |||
Finish | N/A | N/A | N/A Zinklad 1000 | |||
|