Spirol® Roll Formed Hardened Spring Dowels
Pins
Roll formed hardened Spirol® Spring Dowels accurately align mating components with respect to each other. They are formed around arbors to assure roundness, have staggered seams to prevent interlocking, and lead-in beveled chamfers ease insertion. Their outer diameter is larger than the diameter of the mounting hole, and their spring action enables them to conform to a drilled or cored hole and be self-retained.
Unit of Measure
Items |
E10S08480001 Spirol® 6.25 to 6.50 Millimeter (mm) Outside Diameter Roll Formed Hardened Spring Dowel |
E10S08480002 Spirol® 6.25 to 6.50 Millimeter (mm) Outside Diameter Roll Formed Hardened Spring Dowel |
E10S08480003 Spirol® 6.25 to 6.50 Millimeter (mm) Outside Diameter Roll Formed Hardened Spring Dowel |
E10S08480004 Spirol® 6.25 to 6.50 Millimeter (mm) Outside Diameter Roll Formed Hardened Spring Dowel |
E10S08480005 Spirol® 8.25 to 8.50 Millimeter (mm) Outside Diameter Roll Formed Hardened Spring Dowel |
|||||
Description | N/A Roll formed hardened Spirol® Spring Dowels accurately align mating components with respect to each other. They are formed around arbors to assure roundness, have staggered seams to prevent interlocking, and lead-in beveled chamfers ease insertion. Their outer diameter is larger than the diameter of the mounting hole, and their spring action enables them to conform to a drilled or cored hole and be self-retained. | |||||||||
Brands | N/A Spirol® | |||||||||
Material | N/A Steel | |||||||||
Outside Diameter | N/A 6.25 to 6.50 mm | N/A 6.25 to 6.50 mm | N/A 6.25 to 6.50 mm | N/A 6.25 to 6.50 mm | N/A 8.25 to 8.50 mm | |||||
Minimum Single Shear Strength | N/A 6.90 kN | N/A 6.90 kN | N/A 6.90 kN | N/A 6.90 kN | N/A 11.90 kN | |||||
Wall Thickness | N/A 0.56 mm | N/A 0.56 mm | N/A 0.56 mm | N/A 0.56 mm | N/A 0.71 mm | |||||
Nominal Dowel Diameter | N/A 6.00 mm | N/A 6.00 mm | N/A 6.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
Hole Tolerance | N/A 6.00 to 6.13 mm | N/A 6.00 to 6.13 mm | N/A 6.00 to 6.13 mm | N/A 6.00 to 6.13 mm | N/A 8.00 to 8.13 mm | |||||
Length (L) (Decimal) | N/A 10.00 mm | N/A 12.00 mm | N/A 20.00 mm | N/A 25.00 mm | N/A 12.00 mm | |||||
Finish | N/A Phosphated Oiled Plain Oiled Zinc plated | |||||||||
Fabrication Process | N/A Hardened | |||||||||
Material and Hardness | N/A 1070-1095 Carbon Steel (AISI 1070-1080; DIN 177222 CK67-75; BS 1449 CS70-80) HV: 420 to 545 | |||||||||
Features and Benefits |
N/A
Hole Recommendations:
|
|||||||||
|