EFC International - Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight Fittings

These Straight NPT Threaded Economy Nylon Liquid-Tight Fittings offer cost savings and are UL approved for use with Liquid-Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing) Optional Black and Gray Collars are also available, to neaten rough cut tubing ends, and are listed. Locknuts are listed in the "Liquid-Tight Locknuts" section of our Electrical catalog.

Request Information

Unit of Measure

Items	20300044-A030 Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight to Fit 3/8 Inch (in) Conduit Size	20300044-A07I Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight to Fit 3/8 Inch (in) Conduit Size	20300046-A030 Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight to Fit 1/2 Inch (in) Conduit Size	20300046-A07I Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight to Fit 1/2 Inch (in) Conduit Size	20300047-A03I Straight National Pipe Thread (NPT) Economy Nylon Liquid-Tight to Fit 3/4 Inch (in) Conduit Size
Description	N/A These Straight NPT Threaded Economy Nylon Liquid-Tight Fittings offer cost savings and are UL approved for use with Liquid-Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing) Optional Black and Gray Collars are also available, to neaten rough cut tubing ends, and are listed. Locknuts are listed in the "Liquid-Tight Locknuts" section of our Electrical catalog.
Temperature Index¹	N/A 125 ºC
Flammability Rating	N/A 94V-2
Weight	N/A	N/A	N/A	N/A	N/A 23.02 lb
Across Flats	N/A 1.180 in30.00 mm	N/A 1.180 in30.00 mm	N/A 1.180 in30.00 mm	N/A 1.180 in30.00 mm	N/A 1.370 in34.80 mm
Material	N/A Nylon 6/6
Color	N/A Black	N/A Gray	N/A Black	N/A Gray	N/A Black
Mounting Hole Size	N/A 0.875 in22.20 mm	N/A 0.875 in22.20 mm	N/A 0.875 in22.20 mm	N/A 0.875 in22.20 mm	N/A 1.109 in28.20 mm
Thread Length	N/A 0.625 in15.90 mm
Fits Conduit Size	N/A 3/8 in	N/A 3/8 in	N/A 1/2 in	N/A 1/2 in	N/A 3/4 in
Nut Thickness	N/A 0.200 in5.10 mm
Maximum Overall Length	N/A 1.72 in43.70 mm	N/A 1.72 in43.70 mm	N/A 1.72 in43.70 mm	N/A 1.72 in43.70 mm	N/A 1.84 in46.70 mm
Optional Finishing Collar	N/A 20300399-A02	N/A 20300400-A07	N/A 20300401-A02	N/A 20300402-A07	N/A 20300403-A02
Ingress Protection (IP) Rating	N/A NTP style is liquid tight
Industry Standards/Certifications	N/A Under the Component Program of Underwriters'™ Laboratories File #E121095.
Features and Benefits	N/A Easy, permanent assembly: the installer twists the tubing over the connector ferrule, until the tubing clicks into place. It's that easy! No tools needed for installation. Unique locking fingers accommodate various chassis thicknesses. Suitable for a wide array of electrical applications: Commercial and Industrial HVAC Systems Motorized Equipment Enclosed Power Sources Garage Door Openers Major Appliances If using a tapped hole , Polytetrafluoroethylene (PTFE) tape is needed on the threads of the connector, for all other applications an O-ring and Locknut are needed to attain Liquid-Tight.
¹ Maximum Temperature on the part shall not exceed 105ºC.