Butt Splices are used to splice or connect wires to one another by butting their ends together inside the splice and are available in AWG 22 - 1/0 wire sizes.
Request Information
Unit of Measure
Items
Electrical Wire Butt Splices

0.975 Inch (in) Length Electrical Wire Butt Splice
Electrical Wire Butt Splices

1.080 Inch (in) Length Electrical Wire Butt Splice
Electrical Wire Butt Splices

1.305 Inch (in) Length Electrical Wire Butt Splice
Electrical Wire Butt Splices

0.827 Inch (in) Length Electrical Wire Butt Splice
Electrical Wire Butt Splices

1.280 Inch (in) Length Electrical Wire Butt Splice
Description N/A Butt Splices are used to splice or connect wires to one another by butting their ends together inside the splice and are available in AWG 22 - 1/0 wire sizes.
Type N/A Butt Wire
Inside Diameter N/A N/A N/A N/A 0.138 in3.50 mm N/A
Outside Diameter N/A N/A N/A N/A 0.223 in5.70 mm N/A
Length N/A 0.975 in24.80 mm N/A 1.080 in27.40 mm N/A 1.305 in33.10 mm N/A 0.827 in21.00 mm N/A 1.280 in32.50 mm
Barrel Style N/A Polyvinyl Chloride (PVC) Insulated N/A Large Gauge N/A Polyvinyl Chloride (PVC) Insulated N/A Non Insulated N/A Polyvinyl Chloride (PVC) Insulated
Wire Size N/A 16/14 AWG N/A 16/14 AWG N/A 12/10 AWG N/A 12/10 AWG N/A 12/10 AWG
Barrel Features N/A Permanent Rigid PVC Sleeve; Protects Against Vibration Damage; Funnel Entrance Prevents Wire from Folding; Improves Crimping Rates; Enhances Wire Termination Reliability. N/A Non Insulated, Seamless Barrel:
  • Seam Welded Shut
  • Ideal for Hard-to-Crimp Solid and Stranded Wires
  • Can be crimped from any angle.
 		N/A Permanent Rigid PVC Sleeve; Protects Against Vibration Damage; Funnel Entrance Prevents Wire from Folding; Improves Crimping Rates; Enhances Wire Termination Reliability. N/A
  • Seam Welded Shut
  • Ideal for Hard-to-Crimp Solid and Stranded Wires
  • Can be crimped from any angle.
 		N/A Permanent Rigid PVC Sleeve; Protects Against Vibration Damage; Funnel Entrance Prevents Wire from Folding; Improves Crimping Rates; Enhances Wire Termination Reliability.
Features and Benefits N/A The wires are inserted from either end and butt against a built-in wire stop. Then the connector is crimped in two places, one for each wire, holding them securely in place. Their seams are brazed, so they will not open under conditions of stress or pull. They are very versatile and can be crimped under most adverse conditions by many types of tooling.
Product Catalog