Wing Lock Electrical Wire Connectors
Wire Connectors and Disconnects
Wing Lock Wire Connectors have an inner spring to accommodate a wider variety of wire size combinations, and "wing-like" protrusions at the sides for ease of application. They are available in 18/10, 18/8 and 14/6 wire ranges.
Unit of Measure
Items |
E19E09700001 3/8 Inch (in) Dimension C Wing Lock Electrical Wire Connector |
E19E09700002 17/32 Inch (in) Dimension C Wing Lock Electrical Wire Connector |
E19E09700003 9/16 Inch (in) Dimension C Wing Lock Electrical Wire Connector |
E19E09700004 21/32 Inch (in) Dimension C Wing Lock Electrical Wire Connector |
||||
Description | N/A Wing Lock Wire Connectors have an inner spring to accommodate a wider variety of wire size combinations, and "wing-like" protrusions at the sides for ease of application. They are available in 18/10, 18/8 and 14/6 wire ranges. | |||||||
Material | N/A Sleeve - Molded Nylon Spring - Plated Steel | |||||||
Maximum Temperature Rating1 | N/A 105 ºC221 ºF | |||||||
Dimension B | N/A 1-1/32 in | N/A 1-1/4 in | N/A 1-5/16 in | N/A 1-5/16 in | ||||
Dimension C | N/A 3/8 in | N/A 17/32 in | N/A 9/16 in | N/A 21/32 in | ||||
Dimension A | N/A 11/32 in | N/A 11/32 in | N/A 15/32 in | N/A 9/16 in | ||||
Dimension D | N/A 1/2 in | N/A 5/8 in | N/A 11/16 in | N/A 25/32 in | ||||
Dimension E | N/A 23/32 | N/A 29/32 | N/A 1 | N/A 1 - 7/32 | ||||
Maximum Copper Wire | N/A #12 x 3 | N/A #12 x 5 | N/A #10 x 3 with #12 x 1 | N/A #6 x 1 with #8 x 2 | ||||
Minimum Copper Wire | N/A #18 x 2 | N/A #14 x 2 | N/A #12 x 2 | N/A #12 x 3 | ||||
Wire Size | N/A 18/10 AWG | N/A 18/10 AWG | N/A 18/8 AWG | N/A 14/6 AWG | ||||
Features and Benefits | N/A The spring inside these Wing Lock Wire Connectors is formed by a coiled square wire with angled edges. It easily expands inside the plastic shell to fit a large variety of different wire gauge combinations. When the connector is tightened by being twisted onto the wires, the edges of the spring grab the conductor, and the shape of the connector forces even pressure to be applied to the entire area of contact. The result is a secure joint with a low resistance connection that will withstand pull and vibration. | |||||||
|