These Straight Snap-In Economy Nylon 6/6 Liquid Tight Fittings offer extra cost-savings and are UL approved for use with Liquid Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing)Optional Black and Gray. Collars also available as listed below, to neaten rough cut tubing ends. Locknuts are listed in the "Liquid Tight Locknuts" section of our catalog.
Unit of Measure
Specifications
Across Flats |
N/A 0.750 in19.00 mm |
Mounting Hole Diameter |
N/A 0.540 in13.70 mm |
Overall Length |
N/A 1.330 in33.80 mm |
Body Length |
N/A 0.344 in8.70 mm |
Fits Conduit Size |
N/A 1/4 in |
Nut Thickness |
N/A 0.090 in2.30 mm |
Color |
N/A Black |
Material |
N/A Nylon 6/6 |
Temperature Index1 | N/A 125 ºC |
Weight |
N/A 20.02 lb |
Flammability Rating |
N/A 94V-2 |
Industry Standards/Certifications |
N/A Under the Component Program of Underwriter's Laboratories File #E121095. |
- 1 Maximum Temperature on the part shall not exceed 105 ºC.