Cushion and Metal Routing Clamps
cushion-and-metal-routing-clamps
Engine and Deck Mount Routing Clamps for Casing and Bowden Wire
(6) Engine and Deck Mount Clips for Casing and Bowden Wire lock onto the wire casing. 15K282-a.jpg
Extruded High Load Reinforced Cushion Clamps
(62) These Reinforced High Load Single Tube Marine Grade Cushion Clamps have reinforced band ends to prevent them from tearing or loosening under high mechanical load. They are made from high grade Non-Magnetic Nickel Chromium Stainless Steel, and are suitable for securing pipes, cables and cable harnesses, cable ducts, hose and other flowlines. 15n653-a_1.jpg Extruded High Load Reinforced Marine Grade Cushion Clamps
(56) These High Load Single Tube Marine Grade Cushion Clamps are made from high grade Non-Magnetic Nickel Chromium Stainless Steel, and are suitable for securing pipes, cables and cable harnesses, cable ducts, hose and other flowlines in high mechanical load applications. Their form-fitting, adaptable bands are reinforced at the ends to prevent tearing or loosening in the clamping area. 15n1295-a_3.jpg Extruded Low Load Single Tube Zinc Plated Steel Cushion Clamps
(13) Pipe retaining clips are ideal for attaching and retaining pipes, cables, cable harnesses, cable ducts, hoses and a wide variety of mains and lines. The Low Load Single Tube Cushion Clamps shown here do not have reinforced band ends, and therefore are used in applications where they will bear only slight mechanical loads. They are made from electro-zinc plated carbon steel, in 12mm band width. They come without screws and nuts, and we recommend screw M6. 15n652-a_1.jpg Half-Loop Cushioned Routing Clamps with 1 Bolt Hole
(49) These Half-Loop Cushioned Routing Clips are single tube and have one Bolt Hole. These are available with a vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service. 15k1454_a.jpg Heavy Duty Furnished Closed Cushioned Routing Clamps
(130) Heavy Duty Cushioned Routing Clamps - furnished Closed are for heavy-duty applications, and are made from steel that is heavier or wider than is used for other types. These are available with vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service. 15k1450_a.jpg J-Shaped Cushioned Routing Clamps with 1 Bolt Hole
(78) These J-Shaped Routing Clips are an open type with a single Bolt Hole. 15k1453-a.jpg Light Duty Cushioned Routing Clamps with 2 Round Bolt
(24) These Light Duty Cushioned Routing Clamps are closed, furnished open. They have black vinyl cushioning and 2 round holes for fastener sizes #6 through #10. They can be snapped over the tube or wire and closed with the bolt at assembly. 15k1448_a.jpg Light Duty Flared Cushioned Edge Routing Clamps
(45) Light Duty Flared Edge Routing Clamp-Cushioned are furnished open. These fully encloses the metal and cannot come off during assembly or in service. 15k1452-a_1.jpg 
