These Align Nuts can overcome panel-aligning problems on fast-moving assembly lines. They snap quickly into position on metal or plastic panels and instantly align with power-driven screws. Because drift pins or forced alignment is not needed, these Align Nuts eliminate delays and the risks of hole/panel damage and expensive scrap loss.

Blind assembly costs are cut in half with these Front Mounting Cage Nuts. They are quickly tipped into the mounting hole from the front side and drifted into locked position behind the panel with a simple awl-like tool. Two wing-like spring legs at either side of the captive cage nut provide spring tension to hold it in bolt-receiving position and allow slight lateral movement to compensate for normal build variations. A shallow emboss allows flush mounting of mating panels.

Mid Panel Multi-Thread M6 Expansion Nuts are one-piece, self-locking, multi-purpose devices that prevent screws from loosening due to vibration. The use of spring nuts can eliminate the need for additional fasteners. And, because they allow faster and easier assembly, Mid Panel Nuts can lower manufacturing costs - requiring no special tools, equipment or skills for installation.

Mid Panel Multi-Thread M4.2 Expansion Nuts are one-piece, self-locking, multi-purpose devices that prevent screws from loosening due to vibration. The use of spring nuts can eliminate the need for additional fasteners. And, because they allow faster and easier assembly, Mid Panel Nuts can lower manufacturing costs - requiring no special tools, equipment or skills for installation.

These Plastic and Metal Cage Nuts are helicoid retaining nuts especially suited for the automotive industry. They are mounted directly on the equipment complete with their screw. The cage is made from Polyamide 66 and the nut is plated steel.

Floating clinch nuts provide a self-clinching fastener with a floating nut that compensates for mating misalignments to 0.030 inches (0.8 mm) and provides prevailing torque for the mating screw equivalent to MIL-N-250-27 specifications. All self-clinching fasteners install into a round hole, which may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.

Nut Plates offer a lightweight, high-strength fastener with one or more drawn threaded sleeves attached to the mating component, with unlimited innovative features. They come in three types of attachment; snap-in-place, tab-in-place and weld-in-place.

Latch Type Speed Nut fasteners can be quickly and easily snapped into center-panel locations for blind assembly attachments. They incorporate a sturdy "heel" and long, sheared tab opposite called the "toe". Latch Type Speed Nuts are self-retained in a screw or bolt-receiving position and require no welding, clinching or riveting.

Self-Aligning Expansion Type Fasteners overcome panel aligning problems on fast-moving assembly lines. They snap quickly into position on metal or plastic panels, etc., and instantly align with power-driven screws.

Toggle Nuts are easy to apply, shock and vibration resistant and provide high shear and tensile strength. They also provide thermal and electrical insulation. These nylon fasteners snap easily into place from the front side and are self-retained - ideal for blind attachments.