EFC International - Klamp Tite® Protruding Head Breakstem Rivets

These Klamp-tite Protruding Head Rivets have an external locking feature that requires a special nose tip. This rivet provides good vibration resistance and exceptional clamp-up strength for a wide grip range. Three-leg formation compensates for oversized or irregular holes. There are two styles available-one with protruding head, and one with countersunk head. If your application requires a style or size not available on this page, please contact EFC International for more information.

Request Information

Unit of Measure

Items	E26007640001 Klamp Tite® 0.890 Inch (in) Maximum Length L Protruding Head Breakstem Rivet	E26007640002 Klamp Tite® 0.985 Inch (in) Maximum Length L Protruding Head Breakstem Rivet	E26007640003 Klamp Tite® 1.120 Inch (in) Maximum Length L Protruding Head Breakstem Rivet	E26007640004 Klamp Tite® 1.300 Inch (in) Maximum Length L Protruding Head Breakstem Rivet	E26007640005 Klamp Tite® 0.925 Inch (in) Maximum Length L Protruding Head Breakstem Rivet
Description	N/A These Klamp-tite Protruding Head Rivets have an external locking feature that requires a special nose tip. This rivet provides good vibration resistance and exceptional clamp-up strength for a wide grip range. Three-leg formation compensates for oversized or irregular holes. There are two styles available-one with protruding head, and one with countersunk head. If your application requires a style or size not available on this page, please contact EFC International for more information.
Hole Size	N/A 0.204 to 0.209 in	N/A 0.204 to 0.209 in	N/A 0.204 to 0.209 in	N/A 0.204 to 0.209 in	N/A 0.252 to 0.262 in
Nominal Rivet Diameter	N/A 3/16 in	N/A 3/16 in	N/A 3/16 in	N/A 3/16 in	N/A 1/4 in
Head Diameter A	N/A 0.445 in	N/A 0.445 in	N/A 0.445 in	N/A 0.445 in	N/A 0.560 in
Rivet Grip Range	N/A 0.050 to 0.250 in	N/A 0.187 to 0.375 in	N/A 0.375 to 0.562 in	N/A 0.562 to 0.750 in	N/A 0.060 to 0.250 in
Maximum Rivet Length L	N/A 0.890 in	N/A 0.985 in	N/A 1.120 in	N/A 1.300 in	N/A 0.925 in
Maximum Blind Length E	N/A 1.210	N/A 1.300	N/A 1.430	N/A 1.620	N/A 1.300
Sleeve Diameter D	N/A 0.197 in	N/A 0.197 in	N/A 0.197 in	N/A 0.197 in	N/A 0.242 in
Stem Diameter S	N/A 0.103 in	N/A 0.103 in	N/A 0.103 in	N/A 0.103 in	N/A 0.136 in
Head Thickness B	N/A 0.088 in	N/A 0.088 in	N/A 0.088 in	N/A 0.088 in	N/A 0.113 in
Material	N/A Aluminum
Features and Benefits	N/A High Shear and Tensile Strength - The hardened mandrel in these Rivets provides high tensile strength and shear values. High Clamp-up - This Rivet will draw sheets firmly together, even when separated by as much as 3/16". Visible Lock - This Rivet will withstand severe vibration without loss of the mandrel's plug section.