Heavy Duty Furnished Closed Cushioned Routing Clamps
Cushion and Metal Routing Clamps
Heavy Duty Cushioned Routing Clamps - furnished Closed are for heavy-duty applications, and are made from steel that is heavier or wider than is used for other types. These are available with vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Unit of Measure
Items |
15K200344-53 0.625 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp |
15K200345-53 0.625 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp |
15K200346-53 0.750 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp |
15K200347-53 0.625 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp |
15K200348-53 0.625 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp |
|||||
Description | N/A Heavy Duty Cushioned Routing Clamps - furnished Closed are for heavy-duty applications, and are made from steel that is heavier or wider than is used for other types. These are available with vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service. | |||||||||
Weight | N/A | N/A | N/A | N/A 1.18 lb | N/A | |||||
Hole Center to End | N/A 0.250 in | N/A 0.312 in | N/A 0.375 in | N/A 0.250 in | N/A 0.312 in | |||||
Hole Center to End Tolerance (±) | N/A 0.015 in | |||||||||
Center to Center Length | N/A 0.531 in | N/A 0.594 in | N/A 0.656 in | N/A 0.562 in | N/A 0.625 in | |||||
Center to Center Tolerance (±) | N/A 0.031 in | |||||||||
Width | N/A 0.625 in | N/A 0.625 in | N/A 0.75 in | N/A 0.625 in | N/A 0.625 in | |||||
Width Tolerance (±) | N/A | |||||||||
Gage (G) | N/A 0.320 in | |||||||||
Hole Diameter | N/A 0.281 in | N/A 0.310 in | N/A 0.310 in | N/A 0.310 in | N/A 0.310 in | |||||
Hole Diameter Tolerance (±) | N/A 0.001 in | |||||||||
Diameter Tolerance (±) | N/A 0.310 in | |||||||||
Gap | N/A 0.062 in | |||||||||
Gap Tolerance (±) | N/A 0.31 in | |||||||||
Clamp Diameter | N/A 0.187 in | N/A 0.187 in | N/A 0.187 in | N/A 0.250 in | N/A 0.250 in | |||||
Clamp Diameter Tolerance (±) | N/A 0.31 in | |||||||||
Material | N/A HD Galvanized Steel | |||||||||
Finish | N/A G90 Galvanized | |||||||||
Cushion Material | N/A Black Vinyl | |||||||||
Features and Benefits |
N/A
Heavier, wider steel for heavy duty applications. Single tube, two bolt holes. Clamps Are Formed Closed - Natural Spring Back Allowed. Cushion
|
|||||||||
Note | N/A If opening is necessary for assembly, a closed clamp furnished open should normally be used. | |||||||||
|