EFC International - J-Shaped Cushioned Routing Clamps with 1 Bolt Hole

These J-Shaped Routing Clips are an open type with a single Bolt Hole.

Request Information

Unit of Measure

Items	11000JC7030-53 0.203 Inch (in) Hole Diameter J-Shaped Cushioned Routing Clamp with 1 Bolt Hole	113010500-99 0.406 Inch (in) Hole Diameter J-Shaped Cushioned Routing Clamp with 1 Bolt Hole	11317000-50 0.406 Inch (in) Hole Diameter J-Shaped Cushioned Routing Clamp with 1 Bolt Hole	11705000-53 0.203 Inch (in) Hole Diameter J-Shaped Cushioned Routing Clamp with 1 Bolt Hole	15K200007-53 0.281 Inch (in) Hole Diameter J-Shaped Cushioned Routing Clamp with 1 Bolt Hole
Description	N/A These J-Shaped Routing Clips are an open type with a single Bolt Hole.
Finish	N/A Galvanized G90
Cushion Material	N/A Black Vinyl
Hole Center to End	N/A 0.218 in	N/A 0.375 in	N/A 0.375 in	N/A 0.218 in	N/A 0.250 in
Hole Center to End Tolerance (±)	N/A 0.015 in
Clamp Size	N/A 0.125 in	N/A 0.250 in	N/A 0.375 in	N/A 0.250 in	N/A 0.250 in
Center to Center Length	N/A 0.687 in	N/A 0.906 in	N/A 1.000 in	N/A 0.812 in	N/A 0.843 in
Center to Center Tolerance (±)	N/A 0.031 in
Width	N/A 0.5 in	N/A 0.75 in	N/A 0.75 in	N/A 0.5 in	N/A 0.5 in
Gage (G)	N/A 0.025 in	N/A 0.032 in	N/A 0.032 in	N/A 0.032 in	N/A 0.032 in
Hole Diameter	N/A 0.203 in	N/A 0.406 in	N/A 0.406 in	N/A 0.203 in	N/A 0.281 in
Hole Diameter Tolerance (±)	N/A 0.005 in
Width Tolerance (±)	N/A 0.010 in
Tolerance (±)	N/A 0.031 in
Material	N/A Hot Dipped Galvanized Steel, Chemically Treated G90 CRCQ Steel, 0.0002 min. Zinc with Clear Chromate CRCQ Steel, 0.00015 min. Zinc with Yellow Dichromate CRCQ Steel, 0.0002 min Zinc with Yellow Dichromate
Weight	N/A	N/A	N/A	N/A	N/A 1.07 lb
Features and Benefits	N/A When it is desirable to assemble the clamp and add wiring later, this is an excellent choice. Against a rigid surface, it can be closed easily with a screwdriver blade. Pliers or fingers can be used for closing if the back is not supported. The loop portion is contoured.