Knurled Body Insert Nuts
Rivet Nuts
Knurled Body Insert Nuts are used in punched or drilled holes. During insertion, the knurled body expands 360° to fill the hole, thus providing torque strength and vibration resistance. A flange forms on the backside, without any need for adjustments even in multiple thicknesses of materials. These Insert Nuts also offer
- Wedged Heads for greater torque capabilities, especially in soft or thin materials and electrical grounding applications
- Low Profiles
- Large Diameter Heads, and
- Open Ends for versatility
Unit of Measure
Items |
06000339-W-XX 0.02 to 0.08 Inch (in) Open Grip Insert Nut Low-Profile Knurled Body with Wedged Head |
06700071-W-XX 0.08 to 0.13 Inch (in) Open Grip Insert Nut Low-Profile Knurled Body with Wedged Head |
06000301-W-XX 0.02 to 0.08 Inch (in) Open Grip Insert Nut Low-Profile Knurled Body with Wedged Head |
06000371-W-XX 0.08 to 0.13 Inch (in) Open Grip Insert Nut Low-Profile Knurled Body with Wedged Head |
06000305-W-XX 0.02 to 0.13 Inch (in) Open Grip Insert Nut Low-Profile Knurled Body with Wedged Head |
|||||
Description |
N/A
Knurled Body Insert Nuts are used in punched or drilled holes. During insertion, the knurled body expands 360° to fill the hole, thus providing torque strength and vibration resistance. A flange forms on the backside, without any need for adjustments even in multiple thicknesses of materials. These Insert Nuts also offer
|
|||||||||
Thread Size | N/A 6-32 | N/A 6-32 | N/A 8-32 | N/A 8-32 | N/A 10-32 | |||||
Head Height | N/A 0.030 in | |||||||||
Head Outside Diameter | N/A 0.39 in | N/A 0.39 in | N/A 0.39 in | N/A 0.39 in | N/A 0.415 in | |||||
Hole Diameter | N/A 0.265 in | N/A 0.265 in | N/A 0.265 in | N/A 0.265 in | N/A 0.296 in | |||||
Dimension D | N/A 0.265 in | N/A 0.265 in | N/A 0.265 in | N/A 0.265 in | N/A 0.296 in | |||||
Body Features | N/A Knurled | |||||||||
Grip Call Out | N/A 80 | N/A 130 | N/A 80 | N/A 130 | N/A 130 | |||||
Head | N/A Large | |||||||||
Thread Call Out | N/A 632 | N/A 632 | N/A 832 | N/A 832 | N/A 1032 | |||||
Grip Range | N/A 0.02 to 0.08 in | N/A 0.08 to 0.13 in | N/A 0.02 to 0.08 in | N/A 0.08 to 0.13 in | N/A 0.02 to 0.13 in | |||||
Dimension IL | N/A 0.305 in | N/A 0.305 in | N/A 0.305 in | N/A 0.305 in | N/A 0.315 in | |||||
Dimension L | N/A 0.42 in | N/A 0.47 in | N/A 0.42 in | N/A 0.47 in | N/A 0.475 in | |||||
Material |
N/A
|
|||||||||
End Features | N/A Open | |||||||||
Industry Standards/Certifications | N/A Unified National Coarse (UNC) | |||||||||
Finish |
N/A
|
|||||||||
Features and Benefits |
N/A
|
|||||||||
Note | N/A Please contact EFC International directly for more information.Note: Grip Range can be affected by parent material density and actual hole size. Therefore, EFC suggests trial installations to determine optimum grip. | |||||||||
|