Request Information
Short Nylon Snap Bushings are insulating feed-through bushings for limited internal clearance applications (minimum 0.125" or 3.20mm). They insulate and isolate electrical or telecommunications cables as well as low RPM shafts and push-pull rods. These bushings are available in 17 sizes for use in mounting holes from 3/16" - 1" (4.70mm - 25.40mm).
Unit of Measure

Specifications

Material Temperature Index1 N/A 125 ºC

Material

 N/A Nylon 6/6

Color

 N/A Black

Head Diameter

 N/A 0.562 in14.30 mm

Inside Diameter

 N/A 0.375 in9.50 mm

Mounting Hole Size

 N/A 0.500 in12.70 mm

Overall Height

 N/A 0.250 in6.40 mm

Maximum Panel Size

 N/A 0.062 in1.60 mm

Weight

 N/A 0.07 lb

Flammability Rating

 N/A 94V-2

Industry Standards/Certifications

 N/A Recognized under the Component Program of Underwriters' Laboratories File #E15331. Certified by the Canadian Standards Association File #R8919.

Features and Benefits

Features and Benefits

 N/A
  • Locking fingers hold securely after only fingertip pressure "snap-in" installation.
  • Locking fingers in fractional increments up to the maximum chassis thickness.
  • Withstands a push back force of 35 pounds.
  • 1 Maximum temperature on part not to exceed 105ºC.
Product Catalog