These Heavy Duty High Torx® Worm Gear Clamps are used in areas where extremely high band tensile forces and destructive torques are required. They have more robust housing for additional strength over the standard worm drive clamp. They deliver high band tensile force, even tension force distribution, and their fracture torques exceed those of competitive products, greatly increasing the safety of assembly. These clamps are recommended for use in the commercial vehicle sector, in cooling water connections, and air ducts for high and low pressure applications, and are only available in 12mm band width, with or without a constant tension spring insert.
Unit of Measure

Specifications

Type

N/A Worm Gear

Finish

N/A Plain

Maximum Clamp Size

N/A 3.937 in100 mm

Minimum Clamp Size

N/A 80 mm3.150 in

Material

N/A American Iron and Steel Institute (AISI) 430 Stainless Steel

Spring

N/A No Spring

Optional Spring Material

N/A American Iron and Steel Institute (AISI) 304 Stainless Steel

Minimum Corrosion Resistance

N/A 240 hr. in Salt Spray Testing

Band Width (Decimal)

N/A 12.00 mm

Industry Focus

N/A Marine

Features and Benefits

Features and Benefits

N/A
  • Euro-style inner band is stamped, not slotted, to protect the hose from even extreme compression
  • Patented asymmetrical housing prevents screw head from tilting out when tightened
  • Short housing saddle - provides even pressure around the hose without welding or rivets
  • Large Diameter Range - hoses of varying diameters can be secured with a single clamp size
  • Combination Screw - hex, slotted and Phillips, to meet practical needs
  • Emerging band end is deflected away from the screw head, forming a firm closure without pushing off the socket spanner
  • Optional spring insert further assures a continuous, self-acting tightening effect and sufficient radial tension, even at low temperatures.
Product Catalog